I believe a blockage in the tiny compensation port at the master will be the cause; this would result in the clutch pumping up pressure so that it...
The ground won't be at fault if the fan is running. These are wired with an always on power source to the motor, and the temperature switch just...
I know the VTEC sppol valve operation is dependent on the coolant temperature being beyond a minimum point; does this tie into the fan running...
I agree, the temperature switch that is embedded in the radiator is probably in need of replacement....
Under the airbox is the inlet air temperature sensor I believe. The melted connector on the alternator wire is not necessarily a fault due to...
I found a site called Croooober; it all worked out well for me. [ATTACH]
I got a reply from Airtech overnight: "Yes we still make those parts. Please see below for your quote. Everything is made to order and our current...
[ATTACH] https://www.partzilla.com/product/honda/91331-MCP-900?ref=87773be0a4649c7fff82eda1ffeffa83d07f92db #23 in this diagram, 2 required.
I've given up on that idea unfortunately; the whole country is in stay-at-home lockdown, so I decided to get the bike shipped instead. I did a...
Brilliant, thanks Captain.
Apparently, Airtech fairings makes these too for $83, but no response to my query as yet.
Head over to Partzilla, the parts fiche there is easy enough to use....
Is there a pattern part that will do the job for less than OEM? Suggested brand?
Yes indeedy.
Yes the throttle bodies are just held on by the clamps on the inlet rubbers; you just need a really long phillips head screwdriver and a torch to...
Yeah, shit happens. Probably better to have the bike shipped safely to my Man Cave and give it a good going over before the big ride. Actually...
Well dang, COVID has intervened. After 166 days with zero community transmission, we've had five cases pop up overnight, one of which has been...
My VTR1000F had no fuel pump and was totally reliant on gravity; I'm hoping not to find out if the same will be true of the RC24, thanks for the...
I've been worrying about all the things that may go wrong on my journey home Here's a question for the experts, if the fuel pump decides to...
My guess would be either a stuck microswitch at the hand lever or the switch on the rear lever; more likely the latter as it lives in a tougher...
Separate names with a comma.
