Have you got a voltmeter fitted? That would at least enable you to see if battery voltage was an issue. I'm currently riding my 600cc Silverwing...
How is the 3-pin connector between the RR and stator? That is where my VFR showed a voltage loss.
When you press the starter button, the current should pass through the solenoid and then to ground either through the neutral switch on the...
Yep, that will do it all right. What you are seeing is the result of water entering that connector, starting a bit of corrosion. The corrosion...
Idle issues are usually related to air leaks; maybe the throttle body rubbers, or a cracked or missing vacuum hose. Any sensor fault should be...
I had my normally very healthy ST1300 flood on me and it wouldn't start. The fix is to turn the throttle full open then turn it over. The FI...
The manual specifies 14.0-14.8V across a properly charged healthy battery with headlight on high beam, at 5000rpm.
Another possibility would be if the connection between the RR and the alternator was a bit weak/corroded so the current flow was low; with the...
Looks like it comes with a standard SAE connector and a lead for connecting direct to the battery. I have these leads on my bikes permanently,...
The 80's were an exciting time to be a new motorcyclist; looking back it was amazing how quickly Honda went from CBX550 (1982) to VF500 (1984) to...
Assuming the fairing is ABS plastic (this is usually stamped into the piece somewhere) then you can use Permatex Plastic Weld epoxy or Plastex...
[ATTACH] The overflow hose connects to the intake around the fuel cap area, on the underside of the tank.
This might be more useful than the Biblebookinfo....
The shape of the seal lip also gives a clue to the orientation, the lip will normally be near right angles on one face and a longer slope on the...
https://www.bikeexif.com/custom-bikes-week-189 A cool 500-based custom. [IMG]
I have been using Permatex Plastic Welder epoxy on the ABS fairings on my Silverwing and that stuff is incredible. If you want to make it more...
I have a feeling that you might be on a wild goose chase with the ECM. The idle screw and SVs are all linked with the "choke"; the choke and the...
I put an MRA "-R" light smoke screen onto my Silverwing scooter a week or so back. Really nicely manufactured piece with a lovely finish. But,...
I think the HISS system was sold into many world markets but not the US (and maybe they included their northern neighbours). Certainly my 09...
It is good when a supposedly serious problem has an easy solution. I had the opposite on my Suzuki RF900R which developed a lurch under...
Separate names with a comma.
