Nitrogen filled shocks are very common, the nitrogen is in there to prevent the oil from foaming, but it is not intended to be adjusted unless the...
I'm not sure if that is normal or not; every bike I've ever had has some slack through the driveline, so you can rock the back wheel back and...
[ATTACH]
Did the Australian government deport the insects as overstayers Oz? If so I think they've all moved here. During spring/summer I avoid riding...
There's a wiring diagram in the service manual; I'd suggest either the blue/black wire from the headlight relay to the LED driver, or the solid...
I thought I had the same issue on my ST1100 carbs. The rough casting ports for the screws are present on both sides of each carb, but are drilled...
My assumption with the VTEC valves is that they are going to be in use for a fraction of the time of the other 8 valves so they should need...
Yes the small hole at the front bottom edge of the muffler is for water (condensation) drainage.
That vent hose is the only vent point for the fuel tank, so if it heats up in the sun the vapours will definitely be driven out through the hose....
My VFR only has 100,000km, but based on how it runs I can't see why it would be worn out at 160,000km. I agree with FJ12, there are some parts...
Have you investigated getting the wheel straightened? I ran over a lump of wood on my ST1100 and put a decent dent in that, which a local expert...
Your description of the shortcomings of the stock suspension are dead-on; an inability to deal with larger bumps without over-reacting and jolting...
Nice bike mate. I visited Slovenia in 2004 for work, absolutely beautiful place, lovely people, cheap beer. What more do you want? Hope its a...
Probably a 6 volt spider; 12 volts did for him.
Brilliant, my new survival strategy!
For the back brake I was able to leave the caliper alone, and join both standard lines together with a double banjo bolt at the master. Fits like...
I've had the same experience when replacing a master cylinder (with brake lines still full), I refilled the master and just twitched the lever...
I did a quick disassembly tonight just to see if there were any visible faults. All the connectors on sensors were snapped in tight, and the pins...
Very sweet, Pete! That looks showroom fresh.
[IMG] If anything I'd say the VFR would be better on track with a more free-breathing, high-revving engine, and the VTR is better on road with...
Separate names with a comma.
