[IMG] Sent from my iPhone using Tapatalk
As Oz says, the holes in the fairing inner are there for access to the screws. However...it takes a fair bit of hit and miss (mainly miss) to...
That sounds a bit like the clutch in my 95000km old 99 VFR800. It didn't slip at all but the engagement was near the end of the lever travel, and...
Glad you found some of those enlightening/entertaining. The march of technology is a great thing. Back in the day, bikes did not have sidestand...
Riding my CB400N in 1983, after having spent a day at a track with the University M/C club, I found out the hard way about limited ground...
That reminds me of when I rode my CB125T in shorts in 1982, and burned my leg in the same painful manner. That was the last and only time I ever...
Martin I think you will need a new thermostat, and a new battery. Batteries are sneaky little sods, you think they're well charged, but when...
I'd be more worried about other Australian poison critters than I would be about mice! Sent from my iPhone using Tapatalk
Must be throttle fun day today. I jumped on my VTR to try out my new T30 Evo tyres, and all of a sudden had no power! The bike would idle fine but...
Just put the earth wire back in the same place bolted directly to the frame. Make sure the frame is clean where the earth attaches.
[IMG] Great CX photo, sorry that i have none to share. Above is a photo of a couple of valve bodies, these live in the damper cartridge in the...
I feel for you Jeff; I had a similar sort of experience with my ST1100. I can suggest that you take to your carbs again, and in addition to the...
Looks like a good save. My version of events is that your connector got some moisture in it, the terminals corroded a bit, then the increased...
AFAIK, the 929 shock is physically quite a bit shorter than the stocker, so the adaptor makes up for this, and then Daugherty adds another 5mm for...
Just try a thin feeler gauge; maybe that will be all you need.
The shock comes from a CBR929 Fireblade, with modifications to make it 5mm longer than the stock VFR, a rider-weight specific spring and modified...
Well done Aimbot. Get yourself some gasket sealer, you'll need it for the half moons on the camcover gasket. I tried without, and ended up with...
There's about 2 hours work involved, the only thing special needed is a fork seal driver, but I use a 2 foot length of PVC conduit pipe that is...
Once you get the TB's out of the way, you are on the home stretch. You should be able to just swing them clear without pulling off too many...
I was referring to buying parts from Daugherty and installing them yourself. Don't be put off by the distance involved, that's what freight...
Separate names with a comma.
