Very nice 1KF, like the dohc cafe too. :thumb:
How's that ultra rare Wolf underseat exhaust working out in the TX heat? Any issues? Did the bike come with it? Looks great. :thumb:
You can get the plans on the internet for about $15. I know because I got some a few months ago for the spring project...just haven't decided...
Low mount Micron, best sounding slip on for the 5th gen imho, wish I still had one.
'98 - '01 were the same fronts. '02 they went to 43mm forks but I think it may just be wheel spacers that are different, wheel remained the same...
There are still a few out there in business. 4 of 5 local ones shut down but was just in one still going.
Mixing up front and rear. OP asked about front wheels, 4th and 5th are not interchangeable. Rear wheels are a different story as mentioned above.
They have different firmware in the ECU. The ECU gets the same signal but calculates both differently, one calc for the odo to be actual and one...
Another 2 years and 15K, soldered stator wires still fine, so 25K on soldering the wires and eliminating the stator connector. Same battery, kept...
My first street bike, with no previous dirt bike experience, was a little Suzuki 500. I hated the buzziness in the bars and that it would barely...
Only bad failure was 2nd gear going out around 95K. I swapped in a used motor for now and planning to rebuild the original transmission and maybe...
Original stator, and I swapped out the original r/r for the new Honda unit, just because, at around 25K 10 years ago. Few burnt connectors but no...
Did 16K, 32K and 48K valve checks. One valve out at 48K, let it go after that. Valvoline 10-40 dino it's entire life, oil changes every 3K at...
97K of those miles were mine.
Just thought I'd post a pic, '99's mileage end of commute today. [IMG]
Two guys have posted on here about travelling to Prudhoe Bay by VFR, iirc both were 6th gens. I'd have no reservations about taken a good 5th or...
Looks like the gasket is a rubber ring, it can probably be reused. Back a very long time ago I had put a new clutch kit in my V6 Capri, wrestling...
If that doesn't work, something like this might. http://www.amazon.com/Flexible-Claw-Pick-Automotive-Mechanic/dp/B000RB7AGY Most auto stores...
Dealer now asking $3800...good luck with that, moving on...
Here you go: http://www.vfrdiscussion.com/forum/index.php/topic/49611-rear-wheelstires-the-end-all-discussion/ 1998 - 2013 VFR800 5 spoke...
Separate names with a comma.
