You could also contact brakecrafters, I got some rubber caliper pin boots from them because they weren'y included in the K&L kit. Cheers
K&L 32-1125 some taiwanese guy on ebay
I had good luck using citrus based paint stripper removing the brown powdercoat from side cases. The results aren't nearly as pretty as media...
Problem solved. I replaced the SMC circlip with one from a K&L rebuild kit. This circlip it was obvious which was the flat side. Also I screwed...
I'm tempted by the moto-cnc bar risers but wasn't sure how to determine extra length for the brake & clutch lines.
Next steps, I'm thinking I should get a SMC rebuild kit and check if the rear caliper is seized.
Yeah, I think most circlips are stamped metal, and the flat side is supposed to take the force. Wasn't obvious which was the flat side when I...
I put new seals on the front brakes on my 5th gen last year. This year I added galfer SS brake lines. I also put speed bleeders on the calipers so...
The galfer lines are installed. I also rebuilt the front calipers using a brakecrafters kit. A line wrench is definitely recommended for the...
I had the fuel injectors cleaned by a local specialist when I replaced the thermostat. I did destroy the little injector orings while...
So I punted on repainting the brake calipers but decided to do the fork lowers. They had some corrosion and fair number of chips. [ATTACH] I...
Forks are WIP Here is detail from the lower race. You can see a small indentation, it doesn't look like much but you could feel it turning the...
86vfr lower bearing race removed
86vfr lower bearing race
86vfr upper bearing race
86vfr triple tree
pivot works steering bearings kit
Confirmed; the kit comes with one dust seal. It also includes a small tube of bearing grease. PXL_20230324_183012970 by chuntera posted Apr 2,...
I had issues with a slow leak at the float valve. As part of the last rebuild I left the carbs overnight hooked to a hanging fuel bottle to check...
Has anyone noticed the honda 98-01 service manual buggered the fork disassembly instructions ? It looks like they transposed photos between a...
Separate names with a comma.
