Usually those are a small self-tapping screw. On my 1300 it is about 12mm long as it only has to pass through the collar on the sensor and then...
I had a local auto repair place fix the radiator on my RF900; looked ugly but kept the green stuff inside.
Yes that is the way I view the front calipers as well. You could potentially do the same drill-out on the front calipers as you plan on the back,...
I like it but I bet Greta Thunberg is not happy!
If the coolant is getting puked out of the reservoir overflow, either the reservoir was overfilled cold, or the radiator cap is not holding...
You may find (the hard way) that when you commpletely remove the filter, oil will keep draining from the sump. I would only loosen the filter to...
I watched this as I also own an MT-10 with a similar engine. The key point here was that the rider was racing the R1 professionally and...
I would loosen the oil filter; it is easy to control the flow and adjust the level this way. Your oil suction pump might work but I assume the...
Such a nice stance; love it.
Mmmmm Kriek Boon...love a good cherry beer. Goes down a treat with mussels and frites! Welcome Timmy.
Brilliant! Glad you got that sorted.
I might be wrong about the warning light then; I know earlier Japanese market bikes like the VF750 and VF400 had a warning light (at an annoying...
Those front teardrop indicators, the fluid reservoirs on the bars and the warning label under the seat, definitely look like a Japanese domestic...
The funniest (for me) bird strike happened to my best riding buddy, as I followed him while he rode his GPz900. He suddenly stopped and wbbbled to...
My ST1300 took out a blackbird, (the meaty one, not the XX) last week and I had to wash the blood off the fairing and pull feathers out of the air...
Steering bearings need to be carefully adjusted to find the "sweet spot" between too tight and binding, and too loose and rattly. The adjuster nut...
Make sure that you have the washer with the hose guide in place on the pinch bolt. If the washer is missing, the bolt is long enough to bottom out...
I don't have your bike or stand, but you should direct most effort into stepping on the lever arm on the stand (wear sturdy shoes). The lifting...
Changing the steering bearings is definitely in the DIY category. You need either the proper bearing press tools or great care with a hammer and...
Lovely 1000's Mike! How does the R compare to the F?
Separate names with a comma.
