I feel your pain and have had a similar results after working on my brakes. You don't say if you changed the back pads, but I know from personal...
What a kind fellow you are Mike!
Dodgy plugs would be the easiest thing to swap out. You could also have a poor ignition lead or plug cap connection leading to a lack of sparks....
I did the same damage to my helmet on a city street at about 40km/hr when a jaywalker stepped off a median island in front of me; I swerved to go...
Can't argue with that Grum; wonder how that works?
If the float bowl gaskets don't seal, fuel leaks out, the bowls are not under any vacuum. I assume that the port for vacuum synchronisation is...
Well I am prepared to be amazed at Honda's cleverness but how does the Launch Assist actually achieve that? I can understand how a RBW throttle...
I must be missing something here. Are you suggesting that you fixed a high idle by changing a clutch switch? If so I can't imagine how that...
Mean machine Mello! My best riding buddy has a yellow Valkyrie of a similar vintage, I have only ridden it once but with that wheelbase it feels...
Maybe the action of unplugging and re-plugging the original ECT was enough to clear a bit of corrosion on a terminal somewhere. Stranger things...
It seems unusual for the seal to blow out; I get that a lack of sealant might result in an oil weep but I am very surprised that there is...
There's a decent fault finding flowchart available from Electrosport. https://www.electrosport.com/pages/technical-resources My short version is...
The blokes on the ST-Owners.com website are just as helpful as VFR owners if you get stuck. There's nothing they haven't seen and answered many...
If your bike is still in bits I can highly recommend replacing the o-rings under the coolant elbows that bolt to the cylinders. Very cheap, easy...
Relatively straightforward but the belt cover is surprisingly hard to persuade out of place where it locates at its lower end. When you are in...
My old ST1100; is this the easiest bike in the world to do a valve re-shimming on? Once the bodywork is out of the way, the cam covers are...
[ATTACH] I'd start working back along the relays; have a look at the manual, there's plenty of advice in there....
Actually that looks just the same as the unit on my Silverwing, and I also had the puzzle of reassembling the parts to get the correct action....
Isn't Albuquerque where the major drug manufacturers produce all the meth? Maybe a a coincidence?
If your bike has been parked up for some time there's a good chance the low speed jets (i.e. the ones that the engine needs to run at low rpm)...
Separate names with a comma.
