I feel like my Vtec Spaceship shifts better with Honda GN4. After trying Rotella T6 But I run Rotella T4 in the first gens. Working just fine....
A big Sabre would be nice.. but a big Magna would be better [emoji12] Sent from my SM-N950U using Tapatalk
It would have to be less than $2k I believe the cam issues were fixed by 85.. could be wrong It appears to leak something profusely.. didn't...
Well, I got the tap on the tank fitted for a quick leak test. I haven't noticed anything leaking yet between tank and tap, but there is a tiny...
Here's the upper headlight cowl and the lower left panel available in the RWB. Here in the USA.. I'd imagine shipping would be ridiculous...
Almost there. Rust-Oleum metallic blue and gloss Cherry spray cans. ~$20 with a can of primer. Have a can of Spraymax 2k clear waiting...
Great! You're already that far, now if go ahead and do the orings for the water necks and replace the hoses. Then you will likely never have...
#s 21, 22, and 23 are the orings for the water pipe to engine block ports and for the thermostat in link 1 Also, consider if you are that far into...
That's a strange color for coolant.. Judging by the dry line, it probably is coolant or dirty water serving as coolant. Under the throttle...
Be sure to do the starter valve sync. Much better partial throttle response. And bleeding the linked brakes can be a beeotch.. getting that...
Nice RWB! I have one myself. Honda could have done just fine without the VTec.. but it scoots along just fine in 2v mode. [emoji106] Sent from...
Ah well ahem.. I thought this was the Sabre/Magna forum. My apologies. I have not changed the rear head in frame on an interceptor. Magna, yes....
Shouldn't have to remove the head to replace the rocker pads and cams. But the frame gets in the way of taking the rocker arm shafts out IIRC.....
Head gaskets for the 750 are Very hard to find OEM. Sent from my SM-N950U using Tapatalk
Yes, it's possible. Not easy or fun, but possible. I've done it. But if I had to do it again, I would just pull the engine. Did you find a...
Well, she holds fuel now. Guy had to patch in metal because it was so perforated after removing the existing liner. And that the liner was so...
Only cut the lip slightly wider than the thickness of the new seal. Then you can insert the new seal like dropping a coin into a n arcade game or...
"With a dremel you cut a "slot" in the crankcase lip the width of your new oil seal. You then push the old seal in and spin it with tools, then...
Good lord that beautiful Sent from my SM-N950U using Tapatalk
I need this color [emoji7][IMG] Will consider trade for my RWB Sent from my SM-N950U using Tapatalk
Separate names with a comma.
