There is a 30A on the starter solenoid and a 30A on the positive battery cable going into the harness next to the battery. Sent from my SM-N950U...
DM me if you are parting it out also. Sorry to hear she's done [emoji17] Sent from my SM-N950U using Tapatalk
Thanks! Love roadster cycle. He hooked me up with a replacement regulator kit for my 6th Gen Sent from my SM-N950U using Tapatalk
I was hoping someone has replaced the stock unit with a more modern R/R.. and there is a thread about it.. maybe a sticky? I'm not too familiar...
It looks like stock equipment is a Shindengen unit. Anyone know if an FH020AA will fit in the stock location? Thanks Sent from my SM-N950U...
Made the repair with JBweld. It's not the prettiest, but it's not noticeable unless you're looking for it. Seems to have fixed the vac leak...
Thinking I can sand down the area and make a JB weld patch over the cracks. Sent from my SM-N950U using Tapatalk
Good Lord. That was straight up abuse from some moron before me. Look at that witness mark! You don't need prybars or hammers to pull or seat...
They were eyeballed on the bench. Valves will need to be adjusted I'm sure, so I'll save the feeler strip sync for later Radiator has a leak...
[MEDIA] Getting closer. That's no air filter housing cover. Open base to carbs. Bench/eyeball sync. I need to do a little better carb clean I...
Carb #1 seat didn't look bad after after a qtip and a little elbow grease. Needle tip isn't dented. Pinched diaphragm, but Im pretty sure it'll...
Billy's outback is down until January. [emoji17] Guess I'll be polishing needle seats and praying bowl gaskets are good! Already found one...
Absolutely. I'm getting the super kit from BillyC. Very impressed with his kits for the Magnas. A nice soak, ultrasonic scrub, and some new...
Also I forgot to mention the chunks missing from the plenum are GONE. I would have to fab something up to replace the aluminum in the contour of...
Are there no intake funnels for inside the air cleaner base? I don't see them listed in the fiche Sent from my SM-N950U using Tapatalk
And why did they have to rotate the engine backward so it's a royal PITA to change sparkplugs??[emoji1787][emoji1787] (Don't have factory tool...
Ya I know I know. I learned that lesson with my Magna project. [emoji16] On engine #2 And the list was not necessarily chronological [emoji16]....
Looks tasty! Pulled the trigger on that 84 lower plenum. Hopefully that will get me closer to running. Then it's on to valve clearance,...
This one or this one [emoji482][emoji16][IMG] Sent from my SM-N950U using Tapatalk [IMG]
I hope you are serious, because that is the best news I've heard all day!! I'd send you a drink if I could. If you're into that kind of thing...
Separate names with a comma.
