That is the best 6th gen colour sheme I have ever seen.
Those are grimy pistons AM! Nothing a toothbrush and brake cleaner won't fix. + 1 on the disposable gloves, use them all the time now. I...
Onya mate. You need to post a picture or you'll be hounded.
If oil light didn't light up, the problem could be elsewhere. Cams/valve trouble? I had to replace the cams on mine back in the day as they pitted...
I must admit I've never heard of oil evaporating in heat. Specially 2.5L of it. Your oil light would have been on for a while.
That is very sad mate. I still don't get where the oil went, was it leaking? Did it smoke a lot? Did you forget to put oil in? You really need...
That's $650 Australian dollars delivered. Shit!!! That is a lot of money for a suit I might only use a couple of times a year. It might make sense...
Good job Greg. I like your thorough approach. I also like the way you suspended the bike, simple but elegant. Most of us here will also like to...
Here's the link. Makes interesting reading regarding ECU and a few other things. http://www.hoc.org.uk/gallery/press/2000/2000_VFR800.pdf
I found a really good Honda article on all the differences between 98/99 and 00/01 It was done as a press release to explain the changes and...
It was 109*F here yesterday. Too hot to ride or even work on the bike.
My thought is that if I was going much slower, I would have had trouble staying upright. I think the momentum carried me through. The bike did a...
After all this talk, I hit a wallaby at 120kmh last weekend. Same corner I ran over a goanna last year. I was mid corner on a fast left hander...
Brake cleaner, spray it in there once fully apart and blow dry with compressor. The advantage of brake cleaner is it leaves no residue, fully...
SS8 has a viscosity of 36.4cSt@40 Use the chart bellow to work out what other oils you can use, most come in a size that will do both forks...
[ATTACH] Not again!!!
Yes, the stock master with either rear caliper and three pistons is too aggressive. I have the 5th three pistons with a 14mm master and I think it...
Part numbers for the 2001 and 2005 rear sub assembly are the same.
Picture of finished product. And if you use CBR954 calipers like I did, you will have to pack them out by 3mm to center them on the disk. I used 2...
Here are the drawings for my guard brackets. I used 20mm x 3mm flat aluminium bar from local hardwear store. This is for the brackets on the front...
Separate names with a comma.
