We will have to agree to disagree on that one. I have a 5th, and I ride it hard on my own, or loaded up with the wife on the back on some of the...
The flashing is telling you there is something wrong with your No2 injector. Lose, open contact or short to No2 injector wire, or faulty No2 injector.
The steering geometry of any VFR is very sedate, and they do not need a steering damper. If your bike is doing anything funny, a steering damper...
+ 1 on buying OEM. Price difference is not worth buying anything else. It's not a job you want to do again any time soon.
I believe the actual swing arms are different as they pivot in different places, but the components like wheel carrier, bearings and seals are the...
Did an oil change last night before a ride this morning. Wlaked into the garage to find a small oil patch under the bike. After close inspection,...
To give you an idea, a 6 year old K1300S with 20K miles sells for more than a brand new VFR800 here. And it's still a big heavy bike, goes and...
Does anyone know if a 2012 6th gen oil pan/sump will fit a 5th gen? Just went to do an oil cahnge on my 01 and the sump plug casing cracked...
Agree. I for one would not call an ST or an FJR a sports tourer. BMW's are too expensive to buy and maintain here. Plus the sound of a boxer...
At the moment I'm helping my mate replace his stator and R&R on his Tuono for the third time, the bike has 16000km on the clock. It goes like...
I agree with Norm, this is an electrical problem, octane has nothing to do with it. I recommend checking out your earth block to start with.
Any of the motorcycle suspension suppliers will sell parts online. No hit and miss, there are spring calculators and tested shim stacks for the...
There is enough information on VFR suspension out there, and plenty of help here to get it pretty close on first try. After that you need to test....
Next time you have the forks apart, take note of the DMR shim stack and your rebound stack + spring and your weight, I'm putting together a bit of...
When I was going to plug mine to try a smaller bleed hole, I thought of a tight aluminium dowel with epoxy, but changed to heavier oil instead to...
I think you will definitely need to block it off, or replace it. I have a 1.3mm bleed with mine, and found that too big using cSt17@40 oil. It's...
Have you blocked off all the air hoses after the pair removal? I'm not a great fan of the flapper mod, I don't think it achieves what people think...
I know some people have had a real headache trying to do this. No special tools are needed, but years of use and neglect make the assembly stick...
If the fluid looks that bad, the chances are that the whole system is full of crap. No amount of bleeding will fix that, you need to strip the...
Well, I had to go away for the weekend so I left them soaking in heavy duty degreaser in a plastic bag. Today I brushed them with a brass brush...
Separate names with a comma.
