My own opinion is: Never think that you know everything. No matter how good you are, some one will be better. Listen to old people. Don't try to...
Oil will affect it if its too thick. too heavy, friction modifiers will not do that. It really can only be bad tolerances in the shifting...
Now that, was funny...
What he said ^
I'm not sure what your asking. You don't mention what the noise is, from where, or when its happening.
I hunted for this problem for a while. My ground block looked great as well. Eventually I got rid of it and soldered all the wires, adding a new...
The 86 had a small 16" front wheel, and it makes it hard to get descent new generation tyres. It was a great bike, but a little bit nervous on...
Here it is: http://vfrworld.com/forums/showthread.php/48916-FI-light-sputter-high-revs?highlight=earth+block
Its taped up in the main harness next to the R&R. Search the forum and there will be pictures.
99% sure its the earth block.
Only fuel injection. 98/99 had no catalytic converter or oxygen sensors, and a manual cold start. 00/01 has catalytinc converter, oxygen sensors,...
+ 1 for the checking your earth block before you go any further. Bad earths will cause FI light to do all sort of weird things, as well as making...
Thanks Cadbury, that's what I was afraid of. I was hoping of using a VTR front wheel on mine, as there is one going cheap and mine has been...
I know the axle is the same but shorter. You just use the VFR axle and spacers, and I also know the disks are different, but not sure if offset is...
Does anybody know if a VTR100 front wheel will fit a 5th gen?
My guess is you had a bad connection at the fuse, or else it wouldn't have melted like that. Higher voltage will not make a hot joint, boil the...
I would guess so, but don't know where. I think the 6th gen is under the front fairing, but on yours I have no idea. There has to be a place where...
On the 5th gen, there is a rectangular earth block that connects all the electrical system earths with a multi pin connector. It is taped up in...
There is nothing wrong with the stator wires. It is an AC feed and does not need to be bigger, the issue is not the size, it is the connection....
Separate names with a comma.
