Yea, IDK yet how rare they are for the 93/94's, they seem to be the red headed stepchild of the GSXR line. there are some real oddities about...
Go for it NB, fine with me. My Shwantz bike will be mainly a cosmetic overhaul since Suzuki designers seemed to employ a bunch of grade 4 kids to...
Dont forget to order your gasket kit of Ebay, they (Athena?) make an aftermarket kit with all the stuff you'll need. As far as which gears you...
Well NB, your hope of it being an easy solution seems to have paid me dividends. I have some SUCCESS today Sometimes its the simple things....
Thanks NB. ill go through your points, I "think" ive addressed some of them already. but ill look again The issue is, All Cylinders started off...
Yea, its frustrating and odd. Im dropping cylinders 1 by 1 just like last time. starts off good then first #3 goes , then #4 and last time #1...
Well i found a push in adapter for my compression tester (forgot I had it) compression is great. I did drizzle fuel into the throat of carb 3...
Thanks Capn' I tested the coils the secondary check on both was fine (the probes in the HT leads), the primary I could only reach one coil (the...
Cheers, ill try that too SM Here's my next theory (mind is working overtime on this) -- What if I have a valve hanging up when it gets hot? that...
Thanks Jim, My bet is the coils are fine since its a waste spark system and the same coil fires 2 & 3 at the same time. Not sure what...
Hi Terry, thanks 1. OK, yea , it rattles at all speeds once it gets hot, but just in header pipe #3 which leads me to think its raw fuel and...
Hi Guys, since this is by far the only forum on the Internet with good attendance and sound advice, im going to beg forgiveness and post this...
Sounds good Phil, go git her. Report back when you get her home !! pic's too please
Hi Phil, Its hard to hear from that audio anything beyond the fact its running to be honest. As Squirrelman says, they can be problematic so be...
Here are the finished jackets, will be sent tomorrow via DHL, should be here early next week.... [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Yea, there was no galvanic corrosion at all, just the red locktite , Il likely use Blue when it goes back together with the new sub-frame
Thanks Ray, yea I have a bottle of MEK here, but I just got them loose now. I decided to just go for broke, pulled out a 24" Johnson (breaker)...
Yea, the pencil torch did nothing. My hope is to get them out without having buggering them up and having to wait 2 months for new Suzuki Bolts....
Purple arrow shows one of the 3 bolts to be removed. Above that you can see the scab and hack job from the PO. I have gotten that bolt out now,...
Working on another bike (no not a Honda, but you guys are the best on the web , so im hoping for ideas) Anyone removed the sub-frame bolts from...
Separate names with a comma.
