Depends which way I'm facing. I almost never park pointed downhill, and if I do I would definitely leave it in first, but wouldn't feel confident...
I have previously been using a block of lumber under the headers. Just recently, I had to replace a front exhaust gasket. Coincidence? The best...
http://www.daughertymotorsports.com/vfr800.html I have a shock and fork parts from Mr Jamie Daugherty; well worth doing and at 76000 miles your...
On my ST1100, I had a similar problem which turned out to be a weak spark, low voltage reaching the ECU and coils due to corrosion in the big red...
I don't know of any video, but I found the VFR to be a really easy machine to check valves on, once you get the cam covers off. Gear drives mean...
Does your bike have a vacuum fuel tap? Might have a small leak or diaphragm hole. Sent from my iPhone using Tapatalk
Good idea Oz; I've got a few of those. Sent from my iPhone using Tapatalk
OK not really my speciality. However, from '02 onwards the VFRs have chain-driven cams (gear driven from 86-01), and camchain tensioners tend to...
It's not obvious on Tapatalk; what year VFR have you got? Sent from my iPhone using Tapatalk
Yes, I do have a 5G. I'd suggest you start by cutting out the stator connector and soldering in some wire to make up the length, then see what you...
Faran, my understanding is that on the RR-stator, you just need to remove the connector, and join any pair of yellow wires, so that you end up...
I'd try jump starting off your car battery. If the jump leads get hot, pull your bike battery out of the circuit and try again. Sounds most like a...
Yes that is correct. Sent from my iPhone using Tapatalk
I'm just going from memory here Steve (and it's not the best) but I recall the 85 and 86 are different, where the 85 has a completely flat gasket...
The headlight circuit is deliberately disconnected by the starter button when you push it (presumably so the starter has more amps available), so...
FSM = genuine service manual. I have no idea why it gets called FSM. I have a PDF copy of you need it. Sent from my iPhone using Tapatalk
[ATTACH]
I Googled it. The engine number should be in the format of RC36E-1xxxxxx or similar. Ignore the stuff prior to the "-" and all the digits after...
Do you still have O2 sensors? Or resistors in the wiring loom, in their place?
Partzilla only shows the 700 for 87. In reality, not much real-world performance difference between the 700 and 750 (I owned both), unless you are...
Separate names with a comma.
