First thing you need to do is check that you have power at the coils with the ignition on. Test light or multimeter is needed for this
Also check the solonoid it could also be a problem, but it does sound a bit like a battery not too happy
Thanks for that, it is probably what I thought, needles not seating but I am still trying to find out if the original pump had a pressure switch...
Funny thing, today I pulled my 86 out of the shed as I hadn't had it running for about 18 months, put a battery in it and when I turned the...
Without Harley Davidson and SOW this forum would be quiet :potstir:
I can't understand why you would need a 1/2 inch fuel line, you building some type of drag bike?
I kinda like the guy, gets his head kicked all day and still comes back with a comment like this besides he keeps us entertained, it is better...
i think the path is thru the fuse to the RR and the overvoltage is bled off to ground--that's how the fuse gets blown. Sounds most likely...
There is some very detailed info here somewhere that takes you through every step of carb removal, cleaning and re fitting. Best you find it and...
Ok so why does it blow the fuse something must go to ground to blow it, does it earth out through the stator,rotor or CDI unit, just curious. I...
Would cost us $6 a key and that is if we had the key for him to cut from
Well done good effort
I just googled Old Toongabbie, I thought it was down along the Murray somewhere but it is in the middle of Sydney
Been my name for as long as I can remember :glee:
I think you will find it under the tail light
Riding a bike with a full faring is also a bit daunting at first and knowing where the wheel is when turning does present its problems till you...
Make56 is talking about the riveted master link, have to look hard to find it
But would Slick 50 stop working once it warmed up
Be careful trying to get it in and out of gear without the clutch, can do some more damage
8 degrees isn't a lot floats should be able to cope with that but you never know till you give it a try. maybe longer rubbers on the low side...
Separate names with a comma.
