How did you change them? Do they just pull off? I didn't think they could be changed easily if at all. Nice to know they can.
If that's the case. You're going to need a few little things that you should by from one of the on-line OEM parts places while they are still...
Hey thanks for the site. I knew there were a couple of different 1000's made. But not all of the or the differences. I wish they would have...
Yep the 2-4 cdi box seems bad. I have two of those and would be willing to sell one if needed. First check and clean the connections at the molex...
It would be interesting to see an autopsy on your motor before you blow it. I'll bet the bearings have worn because of low oil pressure. Which in...
Out of curiosity I went out and measured my 750 swing arm. I got the same 21 1/4" as stewartj239 did. I've have heard that the 750's and 1000F's...
A friend of mine found aluminum ones on ebay for about $50. If I remember correctly. That's the operative word there...............
NO. What I'm saying is hook the inlet of the pump to a fuel tank/canister with fuel in it. put the output hose into a container. Hook the pump up...
Sounds like the typical vacuum leak around the carb boots/manifold. If they are original and hard, they need replaced. Still shows available:...
Not quite right on how the fuel pump/relay works. Here's how it works: Relay has 12v going to one side, center contact gets a signal from #2-4...
Wow the price on the leads are ?? This place shows them for $20 each. Not sure if you can order from the states without delays or $$. Check this...
Ignor I take it you haven't raced much or at all. You'd be surprised the parts that fall off bikes that were securely installed. I endurance raced...
Donald are those other guys who are selling, salvage yards? They normally want half of list or close to it. Yes I'm broke also. If I needed...
Really? Same starter as the first gen? That's nice to know! Thanks
Are you sure the fuel is not coming out from where the fuel tube connectors are between carbs are? The T's you made? You do have o-rings on them...
The rollers in the one way starter gear/clutch are sticking. It happens at times. Could be oil varnish/dirt, worn springs/caps, rollers scored or...
When I worked with blown alcohol FC engines. We had exhaust temp probes in each exhaust pipe when on the dyno. Which reads the gas temp. Normal...
I have an 83-85 VF750/700F factory manual on my pc. I found it on the web someplace a few years ago. I could down load it somewhere for you. I...
Shit happens when you ride a motorcycle. I've been there so don't feel alone. The fairing looks to be in good shape, ie no cracks or pieces...
Assuming pump and relay is good. there is only one other thing. The wires and or connectors. Some pin in some connector is not connecting. So...
Separate names with a comma.
