Isn't it grand to be able to get the toys that you want now?[IMG]
Here's a link to an RC36 manual if you need it: https://www.dropbox.com/s/lkc7dmwyi509h0b/vfr750f%20RC36%20service.pdf?dl=0
You could look up the part number eg Partzilla and see if is common to both models. I would guess that it will be the same. Sent from my iPhone...
Billy I would have thought that if you just file off any high spots and polish up with fine sandpaper, you could use a cold metal filler in any...
Check for debris stuck in the fan blade/shroud. You should be able to freely spin the fan by hand. It's not unusual for grass or other objects to...
The tube I have is Marley electrical conduit with 43mm id and 50mm od. [IMG] If you are absolutely unable to find some pipe you can tap the new...
I just push down on the fork cap with a socket and ratchet driver. As Norcal says, there isn't a huge amount of spring tension in the fork....
This might just be the flapper valve solenoid; when the clutch switch gets a little dirty and makes intermittent contact, the solenoid can make...
I use a block of wood under the headers that I cut to a specific height after some measurement. With a helper leaning on the back of the bike just...
Panda, I should add that pads dragging on discs is normal. Pads binding on the disc are not. With the front end elevated, with a hard spin you...
You have a classic blown fork seal. Replacement is not hard but there's a fair amount of disassembly required. I can do this in about 90 minutes...
^^^ I agree with all of that. I've been running Motobatt batteries, no complaints from me, likewise the RK or DID chains.
The other likely culprits for dragging brakes are corrosion on the sliding pins (fixed by removing the calipers, cleaning off corrosion and...
Here's a dropbox link to the full manual Jorge, wiring diagram is at the back....
If you have no power at the fuse then the discontinuity must be on the feed side. There is a blue/orange wire from the ignition switch specific to...
I always wanted to go to Greenland. Did you make it to the Emerald City?
Motorcycle fuel gauges are never very accurate. They are based off a float on an arm, as the float drops the resistance of a potentiometer changes...
Sounds like you're on the right track with the multimeter. Just remember that volt testing should be done in parallel (as you're doing) but...
I once got my 1984 VF400F speedo up to "Made in Japan" on a long downhill.
My old 5th gen runs a very steady 13.7V on the move and has given not a lick of trouble since I fitted a new battery 18 months or more ago. I...
Separate names with a comma.
