Looking from the back of the bike,setting on seat. There are 2 coils the left coil is #1 & 3, left plug is #1 & right plug is #3 cylinder. The...
Rider it normal with a few short close to redline runs. The only thing that needs broken in are the rings. The way to do this is to keep varying...
Two businessmen in Florida were sitting down for a break in their soon-to-be new store. As yet, the store wasn't ready, with only a few shelves...
199q Sorry, thanked Cutter and not you for the info. Didn't know about the coating. Makes sense on those tiny valves.
"I need new intake valves, they are badly grooved" Where are they grooved at? On the stem or face? If the valve face is bad you should be able to...
Could of been a first time buyer. Then after riding got scaret and shit a purple tweenkie. Decided to sell.
Sounds like a lack of fuel. I take it the rattling from 3-5k rpms is only in that range and only when warmed up? If so it sounds like detonation....
The real easy answer to that question is yes. But with unequal exhaust,front cylinder pipes longer than rear. They should make power at different...
That's right. All you need is fuel,compression and spark at the right times of coarse. The way you go about doing that.....well there are hundreds...
That's the chance you take every time you have someone else work on your vehicle. Even if they have some type of a certification like ASE. It...
Yes it does make sense. How much is way off? two, four, six degrees and which way advanced or retarded? Most likely the latter. If advanced then...
Nice find! A Lemans start is cool. We had those in the 24hr races. Never saw them in any other mc races. 2nd the 750 races to find.
Whoaaaa. What is that all about? You can not over charge the cylinders on a normally aspirated FI or carberated motor unless you supercharge or...
Most likely it's the springs between and connecting the carb throttles. They always go "bong" when pulling the carbs off and you have to search...
One thing that I haven't seen that's been said, is to keep your right leg (one that's on the centerstand) bent a little. Then keep your back...
Was it smoking before you did this? If not what has changed? Why the Lucas crap in the oil? You don't need it and it's nothing but a top shelf...
Sruss67 your ignition box's are in the tail section and the connectors can get wet at times. Over the years the contacts can oxidize and make a...
ditto. Take the motor apart and see what the problem is. Then go from there.
Take a hammer and rap the head of the bolt sharply one or two times. This will shock the threads and should break the bond of oxidation between...
The site Packman points out has some good info. Here's something from the site that may be the root cause for all these RR failures. Even though...
Separate names with a comma.
