Everything Terry said and... RT instructions state to remove the circlips, washers and spring on the TRAC fork to disable and I do that when I...
Good job!
Probably the same douche nozzle that thought a chisel is a clutch nut tool.
That could be a feature that Factory feels in an improvement. Given that the two stock pieces share a part number, it seems likely. I don't know...
They are really not that different fundamentally. You got it.
Either shorten those collars or remove them. I remove them. But I also can feel when a clamp is tight and not over-do it. Remove them. That's...
It is very much NOT original. Full repaint... not terrible. Except for that retarded tank stripe. But all the stripes are wrong. Owner just...
Your frame might have some actual slight differences in that area due to a major change in the stock exhaust system. Don't know if a RC24-II...
The "Hondaline" stand was the same one that was installed at the factory for other markets. I think the Canadian models came with them installed....
In Europe they did. Had to buy the kit in the US. Same thing with the 1990 - 93 VFR. And the clock.
NOT a Hondaline Center Stand. But a decent home brew or aftermarket. I have never seen one like that.
Cuz that's how you do it. Sometimes a rap with a real hammer using a wood block interface gives it the shock it needs. But I always start with...
I'd like to do a full bodywork swap on a 500 too. I have a bunch of parts saved up for a pretty sweet build, including a very unique 1/2 fairing.
Very cool. Couple notes.... I've seen some terrible "HRC" placements and that one is right up there. Wrong front rotors, so something's been...
OK. I'll work on digging them out this weekend. Pretty sure I know where they are. If it gets far into next week without me saying something,...
The dimensions for the 290 seem to compensate for your problem. Other 37MM forks the 238 were initially designed for may use damper rods with...
Give me a day or two to get out one of my "MISC FORK" boxes where I have some 500 damper rods already extracted. Also, the different height...
I noticed the FT500, which also has 37mm forks, also lists PD238. So it's not a one off mistake in the catalog. Doesn't mean it's not wrong....
Looks like I better crack some VFR forks apart. And dig out some 500 damper rods. I don't want to go thru this in the future when I do a 500 (...
Different preload spacers for the same pre-load. The YSS valves I bought for a 1986 VFR (not installed yet) that has 37mm forks as well, was...
Separate names with a comma.
