6mm
Good job! VERY CAREFULLY remove the choke plungers. As straight/perpendicular as you can get the wrench on there. DO NOT apply any twisting /...
Yes. Not a smoking gun, but if it pulled smoother earlier in the ride before getting hot, sounds possible. Especially with resistance readings...
Pulse generators often fail (and test bad) when they are hot, but not always. ALSO... I have seen perfectly working units, hot and cold, test...
Purchased and tracking # already provided. Went for plate only, but anybody probably could have surmised that. ;-) Thanks VRF.
Mequiars Fine Cut Cleaner and then Cleaner/Wax. Don't want to try and get thru the anodizing, just polish away the staining and then give it...
PM sent
Of course you use a torque wrench. And a real mechanic believes that and knows when it is mandatory, and when it is not. Things like heads and...
I have definitely folded over some sandpaper and ran it thru the gap, re-checked the gap and cleaned with contact cleaner. Never had a problem.
Correct. I actually left mine out on my 92. It just never looked like it was configured properly to fit right, I couldn't find any good...
[ATTACH] Valves adjusted. 12 of 16 needed some love, most were just on the loose side. I couldn't believe how easy the exhaust came off, not...
Those are the pilot screws. On the stock ones where the cap released, isn't there a tiny flat blade slot? I would epoxy the caps back on and run...
Photo no worky
Looking real good. Don't know if your exhaust clamp clocking is finalized, but the lower one should be rotated so the bolt heads are pointing...
Installing a washer isn't going to help against the lateral wear you report. People that install washers likely think they are helping a problem...
I don't need to be sure. Any real mechanic would never do it. But the breaker might find out after buying one of these/your machines. And then...
Or can be replaced now. OR can be replaced in 15k miles when this chain and sprockets is used up. And somebody doesn't have to FUCKING grind off...
If Gen 9 ever is created, maybe they will ask the same question about VTEC... yo. They already decided DCLBS was extraneous.
Yes... metal. But the paint that was used back then.. unfazed. Actually gleams.
Just offer the cool plate and a Viton oring for sale and account for your time accordingly. Unless you are gonna buy a batch of Pingel valves and...
Separate names with a comma.
