This is post #4 in this whole ordeal. And it's exactly what happened. You read enough to fumble thru bench synching but never came across the...
How old is the rad cap? They are like tetanus shots... if you can't remember the last one and immediately tell the doctor, you're getting one.
Have you recently "topped off" your coolant res tank? Was it a hot day? Sounds like your rad cap released some coolant to the res tank and it...
I use a strip of medium stock paper (~7mm wide) as a feeler gage. Get a nice repeatable drag on the base carb (over the small hole in the bore)...
The carb with the idle adjust is your base, correct. What is your bench synch method?
What "gap"? Either you have the carbs synched or not. The idle adjustment screw is moving all 4 butterfly plates (and changing the "gap"), and...
Dug this out the other night and hand washed it in some warm water and Woolite. [ATTACH] RKA Luggage. [ATTACH] It also has R/W/B side and rear...
I have. You can get some that are the exact same shape as the VF turn signal stay. [ATTACH] You can find them in light and dark smoke too, but...
When was the last time you bled the clutch system (or any system) on your VFR? And the RC36 can be pushed vary hard, all day, every day. With a...
Perhaps search ground issues in some connectors. Also verify you don't have any melty-melty in the main plug on the starter solenoid.
All eBay
I have definitely dealt with that on a couple bikes I've worked on. Switching them around to different locations can buy you a little mileage and...
Had to hit "reply" to see the pics... Wow! Just so fuckin cool.
Translation coming through... processing.... "no"
I had a low mile 86 700 engine with about 17K miles that was pretty noisy. I had adjusted the valves when the engine was out of the frame on a...
Did you actually even read his post?
It actually shouldn't run perfectly without the airbox. It should run kinda crappy because it should be very lean without those restrictions.
There's a bunch of different style Honda Helmet Locks out there. Do some looking around on your bike and see where you can mount a bracket to...
Sorry, but the fact the carbs went back together with dirty emulsion tubes leaves me with little confidence regarding the rest of the job. Those...
Couple things... Make sure you have enough slack in the throttle cables. The proper routing is tricky on the 500s. Are you 100% sure you have...
Separate names with a comma.
