I don't have a machine, and I don't have room for one either. Well, I should say, I don't want to lose any space where it would need to be bolted...
Is exactly why I mount and balance all of my own tires. Hmmmm.... can I please pay you to have the lot boy scratch my rim and mount the tire...
Left to right: Driving lights on ST1100 Police mounts, heated grips, charging system monitor (don't wanna stare at it all the time), USB charging...
I get it thru Amazon. It's a marine grade shrink tube for wiring that has an adhesive inside that activates and seals for corrosion. I've used...
When you go to fire, jump the relay plug to prime the carbs. Otherwise you have to crank and crank and crank. Also, rap on the carbs with a...
Don't know for sure which spring you are talking about. Spring for the old switch is obviously irrelevant. A spring for the pedal itself needs...
Banjo bolt with a pressure switch for the brake light. [IMG]
Hey... I found some heavy duty shrink tubing that has a 3:1 shrink ratio. You can get it over a banjo and it will still shrink down to the line...
Sweet! Yeah you might have to pull the caliper before sliding the wheel forward to remove the chain during maintenance. No biggie. Offer stands...
But I suppose it may depend on your gearing too, where the wheel ends up. If it turns out you need to mod a bracket, I'll give you another one to...
I think when you install the chain and put proper tension the bracket should be fine.
The studs on the hub are fine. It looks exactly like mine. There are no clearance issues, I have a couple thousand miles on mine. There's no...
Stripped down. The carbs are worth some money. Gonna clean the engine and try and sell locally. If not, I'll strip it for bolts. [ATTACH] The...
Hell yes. Nice work. It will be all worth it and you will never have to worry about it again, providing it is stored properly when not in use.
Sold last night. $2300
Pretty damn sure those washers are for the rear brake torque arm shoulderded bolts. The rubber just happens to be stuck to the washer, not...
Hose everything down with electronics cleaner. The windings and the case with the magnets too. Clean up the armature with red erasure. Maybe...
Have you cracked the starter open and flushed out all of the brush dust?
Buyer flaked. SHOCKING! Had to guilt him into giving me a "response" (read: lie). "Got called into work. Getting ready now cuz I have to get...
That left is just the shaft and a needle bearing (for the chain drive forces). The right side has the ball bearings and spacers to control...
Separate names with a comma.
