Long 6mm allen hex socket is the biggest. Maybe some circlip pliers if the seal retainer is that style. And then something to drive the seals...
Pretty much the major difference between 86 F and FII is the gages, the upper cowl stay (for the differnt gages) and inner fairing panels. The...
What gages do you have? Round VFR700F A (AC is California) Square VFR700F2 A
Yes. Stock 1992. "Black" paint even has a purplish metallic.
50K with Title. Tank is spotless inside. 2020 tabs, so not sitting forever. All trim pieces present, except for the side stand cowl... of...
Yes. To properly fill forks you need to go by level, not qty. Forks completely compressed without springs making sure damping circuits are...
1986 RC24 were only 37mm. They went down from 39 that the previous gen had. I also have an article from a magazine where they got to test a...
https://sprocketspecialists.com/
They are easy, just need the right circlip pliers. I will almost guarantee its the tiny bleed hole. Classic symptoms, but it will only do it on...
The tiny "bleed hole" under the little hood thingy down in the bottom of the m/c is likely blocked. It's possible your brakes lines are falling...
16/45 on the RC26. Pretty much because a nearly brand new Sunstar 45 came on one of the CBR hubs, so why not? Rode it last night for the first...
As far as the 17T aspect, just make sure there is room for the chain to turn the corner and not contact anything. Typically Honda provides enough...
And... are you sure the difference between the 2 is 17mm? Those holes are going to be pretty close to each other... nearly "touching"....
Hey... couple things: Make sure you are responding OUTSIDE of the quote. Way less confusing for everybody. And not my listing... just an...
The 86 / 87 is a welded up piece... just like your 93! 86 / 87 are dimensionally the same. The 87 is constructed like your 93. Comparing the...
So very cool.
While you're working in that area, maybe go get a body hammer and heat that bulge up and see if it can be flattened a bit. Now's the time to try,...
You can run the red lenses as all three if you use a trailer light converter box. They are designed to incorporate the functions from vehicles...
I would certainly address that area prior to any kind of finish work. Grinding it out and trying to weld it up. Or welding a small plate after...
Rear subframe and inner fender back on and the wire harness re-routed. Cleaned up, straightened and painted the brake pedal and shifter. Shot...
Separate names with a comma.
