Parts are molded with "LH77217-MCW" and "RH77216-MCW" Def correct for 2002-2004. PM sent
I'm pretty sure you can split the cases without disrupting the heads at all on the 1000R. I've done it on a 500 and that had chains and chain...
Now it is time to dive into the clutch. It was starting to slip under hard acceleration, so in I go. I also wanted to dig a little deeper to...
COVER, R. GRIP *R157* (ITALIAN RED) 77216-MCW-D00ZC COVER, L. GRIP *R157* (ITALIAN RED) 77217-MCW-D00ZC 2002-2004 Got these randomly with some...
Can't quite tell from the pics... which bars? I like the individual throttle housing and start switch. I've been converting my fleet over to...
Yeah, there are instructions about adding some to your oil. And I would reserve judgement until you have it fully road worthy and get a good,...
It's barely discernible on the brakes I deal with (newest brakes I have are mid-90s CBR/VFR), but the seals are not symmetrical. A look in the...
The caliper seals are slightly "dished" and need to be installed in the correct orientation. The dishing helps retract the pistons slightly when...
Thanks for the update duccmann. Firing off a fresh round of positive thoughts.
Nothing like a VFR. Very cool.
Positive thoughts going out now.
Hey! Looking good and welcome!
I usually use a piece of mild steel tubing for my anode. If not I carve a notch for the vent.
Looks cool! Glad I could help. Thanks for posting some pics.
I just take some firm foam and carve into a cone shape to fit the filler opening and drill a hole for the anode. Put a bend on the anode a little...
I've done electrolysis on a half dozen tanks now. It is simple and simply amazing. The best thing is it doesn't hurt the finish on the outside....
Valve float at extended high RPMs leads to mushroomed valve stems and then eventually a dropped/sucked valve. Friend did it twice on his 84 500...
Separate names with a comma.
