Jump the fuel cut relay on the harness side to eliminate that potential issue. You "should" then have power to the pump without having to crank...
Thank you for posting those. The shock looks great. I like your "working mock-up". I was not 100% happy with my rear caliper bracket/brake...
Thanks for the info! Is your U-shaped linkage piece cast or two plates welded to a collar? Cast = 86. Welded = 87. The gold colored crankcase...
Nice job! Would you please elaborate on the rear shock from Jamie? Stock shock re-worked? Also you say, "The rear end went together perfectly...
Don't own an 87 (few 86s), but I have a buddy with an 87. So what is the issue? 2 wire vs 3 wire? Which color is different/missing?
Yep. If you think it has enough material to be blasted, then have it ceramic coated. Pits be damned, it will be sealed anD look just fine....
I ran my racebike without any part of the charging system, including the stator. Battery powers everything. Pulse coils are on the starter...
In some rare instances, but never recommended. We used to run ME22s backwards on VTR250 rears. But you lose your optimal water dispersment from...
Um... no. Your bike doesn't have a 17" wheel, front or rear.
They are straight, but there is a top and a forward due to small reliefs in the molding on the carb side. At least there was. They might have...
Time to start dis-assembling, cleaning and inspecting.
Time to bleed the hydraulic clutch, if you can. You may have multiple issues in regards to that, but it's worth a shot. Just like bleeding...
Kenda makes a BT45 knock-off in a 130/70-18 (and a 110/70-16) that I'm gonna try just because they are so cheap. The Avon AM23/22 in those sizes...
You can go 120/80 no problem on that rim. Will not negatively affect the profile of the tire or the handling.
What was the fitment issue on the 83-85. Mount lugs not in the same spot? I suspect the 1000 starter is physically bigger/longer?
If the bike has been sitting for a length of time, it is highly likely that the clutch plates are merely stuck together. Happens sometimes when I...
Welcome! Very sweet. What a find. But... That is a VF500F. Not a VFR500 (no such thing).
Use Search. Read. Search. Read. Ask questions about what you don't understand (after searching and reading). Then ask "the Master" if he did...
Correct he is. Start reading about the correct way to remove and clean your carbs you will.
Closely inspect your main fuse. It is located on the solenoid next to the battery. Sounds like it may be cracked. Even if it looks ok, take it...
Separate names with a comma.
