Needs to be NOT plugged. Vents to atmosphere with a down turn so nothing can go in. If that is not THE problem, it is a BIG problem. I ran it...
Please clarify this statement. Huge potential issue.
I have de-Californized 4 1986 VFRs now. It is certainly not as complicated as this makes it seem. Hoses that vent or drain are not "vacuum"...
Of course I was, and it's "unleashed" power. You know that.
You can change a right hand crankcase gasket by just putting the bike on the sidestand with the oil in it.
You're gonna need a shitty camera and mount and a GPS tracker to find out how good the exhaust works though.
Sorry, I mistakenly said "VFR" triple clamp. I meant CBR triple clamp, there is nothing getting in the way of handlebar pinch bolt orientation.
There are plenty of options for front ends. The whole CBR600F2/F3 front end swap (both triple clamps and forks) is the most common and seems from...
90 - 97 VFR bars. 90-93 differs from 94-97 by where the pinch bolt is. Think your safe either way with the 86 triple clamp. Have a set on my...
The VFR rear rotors are smaller than the front, but have the same bolt pattern. You can use a front for a rear, but you would need a VF1000F rear...
There are plenty of good choices,...
I would buy that at $2500 no prob. Solder in Reg/Rect and ride it another 100K miles.
I thought I had a set of VF750F forks loose that I could measure, but I didn't. They are definitely much longer than 86 VFR750F forks. If I get...
There are letters and numbers stamped near the center of the cap on the inside. The last three are the key number, like "C15".
What I have done that is way cheaper is have one side of the key cut to one number and the other side cut to the other. The keys are only double...
If you have absolutely no interest or value in my post, what is the intent or purpose of responding, other than to complain and whine to the...
When I first saw this thread title a few weeks ago, I thought, "Oh gawd, another one of these, now on on this site" When I finally checked it out...
RVFR: What is the distance between the two mounting bolts on the lower triple for the horn bracket? Perhaps the "splitter" from a VF500/700/1000...
Separate names with a comma.
