They sold both 700 and 750 in 86. The 700 was made to beat the high tariff on motorcycles over 700CC. A 750 will say "VFR750F" on the tag....
You just verified it's not.
That's the sensor, yes. All U.S. 86 had "gold" covers. Somebody has installed 87 covers or they have been re-finished. How many cc's is the...
86 motors have a timing sensor with a wire on the back of the front cylinder. Then you can look at the casting marks on the cylinder portion of...
Good news.
I've done a swingarm. It is clear anodizing, and it is a bitch. You have to sand thru it then polish it back up.
I can check my SM later, but I'm pretty sure the rear? A little richer for the potentially hotter rear cylinder bank?
Essentially everything should be interchangeable (at least from production 83 750 to production 84 700) And we need pictures.
Living in the NW... Ferry mode. In gear, roll forward till resistance, then side stand. If super paranoid... zip tie front brake lever with...
1st of all... WTF? Never heard of that. Just order by part number. They don't know what bike you are ordering for. 99101-MBZ-1250...
I think if everything is properly setup, you will be very happy with 42 pilot, 125 main and .020 under the needles. It will run sweet. In my...
What is their recommendation based on? I have stock cams in stock heads, stock airbox, and stock headers with a 4-1 slip on. I chose 122 on my...
Got some news, Squirrel... [ATTACH]
Since I don't have any dyno charts to post, all I can go on is 20+ years building, riding and racing VFs and VFRs and finding out what works for...
83-85 VF700/750F carbs will work. 49 state and California. You will have some vents to plug on a California set and the jets will be slightly...
The jets I used are genuine Honda Keihin. You can take the Honda part #s for those jets and change to what size you need. Take a look, you'll...
Your clutch plates are likely just stuck together from sitting. Pretty common. Couple ways to try and un-stick them without dis-assembly. Get...
Yes, Fuel mixture screws / pilot screws... same thing. Fuel screw > spring > washer > oring. You accounted for all of them when you had the...
When you remove the pilot screws for carb cleaning, each one has a spring, washer and o-ring. If you do not know what I am referring to, then a...
On my 86 700 with a 4 into 1, I went with 125 mains, 42 pilots and the stock needles shimmed up using the same washers as the pilot screws have in...
Separate names with a comma.
