I broke a key today and came back to this thread. where are the hiss bikes, in europe only? my keys don't look like that
You know you are getting old when Randy is the only one left posting in this thread
sometimes i step on the peg 1st before bringing the leg over if i feel lazy (GO ESKS)
Do you have voltage on the horn wires when you push the button? if you do it's like other bikes i have had the horn gets rusty from no use and...
you're welcome. i have been keeping an eye on riser threads for a cheap solution too
gen 5's have 41mm forks, gen 6 has 43mm. those spacers won't fit a gen 6
aren't 2003 forks 43mm?
if you are not going whole hog, the aluminum parts cylinders can be cleaned with brake cleaner or carb cleaner in a spray can but the painted...
i have had SLA batteries from them before and they were good, longer lasting than some others i had bought.
anyone found the frame ground on a 6th gen?
i agree with these guys you should clean your carbs but if you want to try it, use a bunch of seafoam. i had a v45 sabre and it would only run on...
i found the grounds it was a lot smaller than it looks in the picture and buried. picked up 0.3v by taking it off and on again. very clean. now if...
nothing like that there at all. i see that unit there with the plugs on it but no other cables there at all. also do you know where the frame...
I don't know where it is , i took off the front fairing and no green connector or ground block. not sure where to look now
i have been in there with a flashlight with the side fairings off and i can't see where it would be
I searched but i must not be entering the right words, is there a common ground block on 6th gens? just trying to check out stuff for the new...
maybe a stuck pad on the caliber pins, or something i do every year. i loosen the rotor bobbins by putting a bolt in each one and tightening until...
don't know if i would rule out tires/rims. maybe a rim has a spot that can't be balanced easily, they don't really spin mc wheels as far a i have...
Thanks..... I have my chips and blank keys from AliExpress also for the CBF.... the guy that cut my keys didn't quite get it right, have to get...
i use these on both my bikes and my truck. on the bikes i bought a 2 pin trailer connector and wired them to the bike batteries so i just plug it in.
Separate names with a comma.
