Sorry to say Radio Shack is out of business!
All Lint's suggestions, except check the ground to the thermal switch first, it is the easiest! [IMG]
Great choice, love my RF-1200
No problem following Honda's specs. Some of us who live in hotter climates use 10W-40. My '83 VF750 calls for 10W-40, so I buy Amsoil Synthetic by...
I know the feeling, after rebuilding the front forks on the '83 (second time), while putting the left caliber on, I got the disk between the back...
The photo you saw is a full blown HRC Superbike! I have had mine since 83, added Lockhart oil cooler (no longer available), Vance & Hines headers,...
I know what you mean, I had to deal with my own neglect of letting it sit in my garage!
Don't hate the poor bike, the PO is responsible. Need to dis-assemble calipers and clean out master cylinder. I did it on my 83, probably some old...
I doubt a 1 volt change is going to bother a robust dc motor. More than likely a failure in the enamel coating of the windings which cause the...
Back in mid-seventies, almost fell aslept on my Kaw Z1 900! Hot day on the NYS Thruway, had to pull off at service center and took an hour nap on...
Sounds like some windings in the motor are shorted, if fused at 10 and it blows 15A, something is definitely wrong. I checked Partzilla for a...
Welcome, nice color, there are those here that say Red is the fastest color! I like it. My preference is Amsoil pure synthetic, if you live in a...
Here are some screen clips from the manual: [IMG] [IMG] [IMG] Fuse C is 10A for BAS. The white wire with the black trace goes to Engine Start...
It's been a number of years since I installed the indicator on my 2003, but I remember the wiring was straight forward. Here is a photo of my...
How is your oil level? Rings need time wear in, could be a little oil burning at first. Wipe the inside of the pipe and see if more carbon builds...
Check the wiring for any evidence rubbing and touching ground. Were the lugs on the fuse corroded? Fuses normally blow for a reason.
Here are some photos of a spare set of 83' carbs: [IMG][IMG][IMG][IMG] Hope this helps.
Any time you have a hot/melted connector, you have resistance, which causes heat! Look like a faulty/corroded crimp on spade lug. Wiring on the...
I can just see the lawsuits when the thing goes off while fitting it, minus a few fingers.
That was the intelligent answer I was looking for. Guess all DCT's are not the same.
Separate names with a comma.
