[IMG]
If you pull the female connector off the thermoswitch and ground it, the fan should run with ignition on. The thermoswitch can be tested (should...
I know you say your fan works, but maybe you've got a little debris or something that is restricting the easy rotation of the fan? The fan on my...
[IMG] Sent from my iPhone using Tapatalk
Do you have new fuel in the tank? Old gas often loses the highly volatile components that make it easier to ignite. You may need to get back into...
Someone else might be able to be more definite than me, but normally the CA versions of a bike will use entirely identical carbs and engines, with...
Not sure whether I can exactly answer all of that. The sidestand switches are completely standard across a lot of Hondas so I am confident that...
I made some great student bucks in 1985 when my VF400F was rented for a Japanese domestic Bridgestone tyre commercial being filmed by a Japanese...
Sorry, wasn't casting aspersions there Jim. I'd do the same. I straightened a front brake disc carrier and lived to tell the tale!
I hope you gave yourself a warranty for the wheel straightening work Jim!
The air tube is there to allow you to add some air pressure to the fork, which adds preload to the fork and will change the ride height. You can...
I ordered a Hot Cams shim kit when I did the shims on my 5th gen. IIRC you get 3 shims per size, which may or may not be enough multiples, but you...
There's no question in my mind that the 6th is a much better looking bike than the 5th, and I'd prefer a 43mm fork over the 41mm in the 5th gen. I...
I wouldn't try to fix that clutch basket; a new one is like $60 IIRC. I would say that part got broken in a decent crash, a big impact on the...
The seller will most likely prefer to avoid getting eBay involved and affecting his/her ratings. I had an experience buying a used brake disc from...
The only things that would allow the wheel to move to the side is either the swingarm pivot or the wheel bearing within the eccentric. It should...
You're welcome. I learned about gearboxes the hard way when my RF900 developed a 2nd gear problem that allowed the dogs to jump out of the slots...
Welcome aboard Godoyi. Here's a link to a dropbox file of the RC24 manual; I don't have the specific manual for an FK but that model was fairly...
It's all I needed on my 5th gen. You would also be wise to go through the hydraulics as well, refresh the fluid, lube the lever pivot, clean...
Here's a Dropbox link to the service manual: https://www.dropbox.com/s/syf7mrjghcbchvb/VFR800-VTEC-2002.pdf?dl=0 The clutch nut on my VTR1000...
Separate names with a comma.
