Starter Location: [IMG][IMG] Per your PM
Could be starter, if solenoid is working, and you are getting 12vdc at output, starter is intermittent.
Why re-invent the wheel? Check these guys out: http://www.airtech-streamlining.com/hondaz/VFR7501986-88.htm
I agree on Mickey D's, having said that, their grilled chicken wraps and sandwiches are the healthiest meal they got, and you can count on a...
Your starter relay is back there, check 30 fuse there, check output of relay with meter. [IMG]
There is a neat book called "Blue Highways" by Least Heat Moon. He decided to take a couple of years off and drive around the country. His...
They draw very little, and it wouldn't be hard to install a switch. I would check PO wiring, make sure it is properly fused and not rubbing anywhere.
Cheap method for cleaning contacts, get some small emery boards and trim to 1/4" wide, peel coarse sand paper off one side, and insert into female...
roadstercycle.com for sure, the man knows what he is talking about. I went with the Series R/R, because I use less power than stock, which means...
[IMG] You should be OK
I went through this whole routine late last year. I started by upgrading lower lamps (H4) to higher wattage lamps (80/100), then upgraded the high...
I take it you have already installed the resistors to fool the ECU (PC Recommendation), they told me K&N did not require an adjustment to the map,...
Words of wisdom from Keith Code & Kristi: Keith elaborated on that point in the lesson-5 discussion. He said that we shouldn't be holding onto...
Hell I am 70 and just getting started!
Don't like contradict others, but a "Dialetric" is an insulator, not conductor, however, you are right, it protects the connection, but should...
For an authoritative and professional explanation of all aspects of lubrication, read this:...
Do the drill, but understand it is current that will charge your battery. High resistance connection can read proper voltage, but the can not...
I thought about making a tool to put in a drill to do this, maybe your right and I didn't get all the crap out. Got an idea, more later.
Nice bikes, will get my VF back next week after many years of just sitting. Who makes the exhaust system with the gold cans?
I haven't been out yet since I did mine. I noticed wear points, looser part of the turn, then tighter in the other part. I guess they should have...
Separate names with a comma.
