How good is the RR/stator connector Kizer? Looking burnt or melting? My running voltage started to drop recently and I think it was crud building...
I have my meter wired direct to the battery posts, with the positive feed going through a fuse and a relay. The relay is activated from the...
I'd pull out my impact screwdriver for that job..
I get 13.7-13.8 at most rpm but then my bike is running a shunt type RR out of a Ducati. That has been plenty to keep my battery topped up and...
Ok I'll start: How does SOW get a wet pussy? He puts Mr Ceasar in the shower. Sent from my iPhone using Tapatalk
Making a blind left turn onto a freeway onramp with no traffic to follow was terrifying for me. I just kept reciting " tighty righty, lefty...
[IMG] Here I am at Big Sur, feeling pretty good about having managed an incident-free drive down the PCH from San Francisco, my first experience...
Yeah, and then there's the cricket! Sent from my iPhone using Tapatalk
The thermo switch is a pretty simple bit of gear so probably no surprise if the new one was triggering at a slightly different temp to the old...
Crikey, 120C is getting TOO hot FB. Are you sure your fan is running properly?
I agree that the main effect of glycol addition is depression of the freezing point, so a higher glycol content does make sense for our North...
As long as the car recognises the RFID chip in the key then the starter fires. No chip, or no recognised chip, and the starter circuit is dead....
Where's your car key worn? You might be able to buy a cheap blank, and transfer the "chip" to the new key. I got a new plastic case/buttons for my...
I think you may have been smking something else already.
I can't say that I have noticed any fade on my 929 shock (which means it either doesn't happen, or I'm too dumb to notice). Maybe you've lost the...
I put a Cyclops Motorsports 3800 lumen H4 bulb in the front of my VTR1000. Much, much brighter than a halogen! This one has a very decent pattern,...
Not really much relationship. I doubt that the wrecker would have any idea the wear was there as the outer edge of the disc was true. I suspect...
Well more close inspection done, now I know where the shudder comes from. The disc is unevenly worn on the inner edge like it wasn't bolted up...
Thanks SOW. I have ordered some of these just for you: [IMG] Sent from my iPhone using Tapatalk
Actually Randy, based on the lack of runout I don't think the discs have been straightened, but someone has tried to crimp the bobbin tighter for...
Separate names with a comma.
