2 throttle cables connect to a bracket on the left front carb, then onto the throttle "wheel" . safest if both cables are connected. :oops:...
have your mechanic check for excessive endplay on the cams. "raeva mi verker !!" :eek:
so maybe she'll visit you in hospital when you finally screw up a wheelie ?
stock pump=3 psi
heads going back on a gen 2 700 and i find that the external oil lines (in the V) have one open dowel pin inside and another with smaller holes...
wheelies are strictly for show-offs, immature kids, daredevils and idiots........unless you just won a motoGP race ! the cost if something goes...
use compressed air to blow into the tank through the fuel line with petcock set on reserve AND on. i've owned VFRs since 1990 and have not yet...
:Clap2:well, OK then !
i miss the header section "new posts" and don't understand why we don't have it any longer.
geeze, jim, i don't think that will work, but honestly i never tried it. the notched ring must be moved to swing the eccentric around and tighten...
#4 looks OK, but the others don't. :eek:
possibly a resonant vibration from the fuel tank or exhaust system.
normally, VfR engines will buzz and protest at slower speeds with too much throttle in too high a gear
the fan coming on at 3/4 scale is normal and OK.
look in classified, please. ;) squirrelman has a good gen3 engine and carbs FS. carbs freshly cleaned, engine has good compression, valves...
today. he would have been 74 and still playing if not for too much drugs. gone but never forgotten. [ATTACH]
carbon there is normal, so don't do anything. carbs are fragile; don't drop them ! remember, you can't be certain slow jets are fully clean and...
you already tried backing out the idle speed adjusting screw ?? does the bike idle OK before warming up ? check that the carbs, boots and...
my advice is to check for the same heat on all headers about 30 seconds after starting. you might have a lazy cylinder thAT only wants to fire...
throttle cables go in front of right fork, then under the fairing stay, then in back of left fork and into the frame.
Separate names with a comma.
