running too hot needs correcting. could be as simple as a bad radiator cap or cooling system flush.
:Yo:i'll get you the info asap........
the FSM usually will show thread size and diameter of the puller.
60 miles east ??? :Pound:
study the wiring diagram, and find which components are fused on the line that blows. then check out each item separately, unplugged from the harness.
good post, RM ! It's always beast to loosen both clamps on each boot.
nice write-up RM
^^ usually takes about one or two days--with fuel kept in carbs--for rubber bits to swell and seal again. heat helps, so if you can get the...
so what is this, about the thousandth time someone asks for help getting his bike running and claims his carbs were clean, and it turns out his...
i luv the idea, so count me in :) area of Buffalo/western NY, I-90. any Honda or Japanese 'cycle OK. might be able to use buddy's truck and...
me, no. any of you Canadians remember nights at the Flying Saucer ? ;)
Raeva mi verker ~!! :Yo: if the firks were replaced, probably a front end impact, so check front wheel and head bearings for damage.
vent tubes don't need hoses but come with about 6" from Honda, angled into the V, so check there for carb leaks b4 riding. alot of bikes have...
the shit can damage an engine, but try spraying starting fluid into the air intake while cranking. if the engine runs on all cylinders, your...
all that work ?? sir, testing the pulser resistance is done at the wires--after they exit the cover, not under the cover. yes, after warming up...
i had a spot of bother last time i tried to get into Canada and met a VERY HOSTILE border guard.
not right. the carb vent tubes are short, like 6" short.
sure fuel is getting to carbs ?
Honda didn't make a VFR until 1986. Doesn't your bike have 2 cdi boxes ? check for clean, bright connections at the plugs for the 2 boxes....
LEDs that size draw almost no power, so it could stay on and look cool at night.
Separate names with a comma.
