Very nice, I was at my dealer today, but no VFRs
I stand corrected, I used Castrol R racing oil in a Mini Cooper back in the late sixties, and always remembered the smell at Watkins Glen, I just...
Years ago Castrol Racing Oil was made from fish oil and made the Grand Prix at Watkins Glen a very aromatic event, great smell!
Thanks to "nearfreezing", this is the proper compound to use, learn something every day! Ox-Gard™ Anti-Oxidant CompoundOX-100BOx-Gard...
Just Googled Dielectric Grease: http://www.ipdusa.com/products/6706/114923-dielectric-grease
Very true: Product Description Dielectric grease is a non-conductive, silicone grease designed to seal out moisture and, therefore, prevent...
True, but normal high beams would not overload series R/R. When I first got my bike, I thought I would be smart and upgraded my H4s low beams to...
When I took off my old chain, several links were stiff from either lack of lubrication or water getting in. I love Simple Green, but would not...
I installed a manual switch on the fan, because in 90+ heat here, temps skyrocket at long traffic lights and riding at 35 or less in town. When...
The series types do more work when there is an increased load, because they only use what current is needed from the stator (like lights on or...
The charging systems on motorcycles (OEM shunt types) are balanced systems, that is, they are designed with predetermined loads of lights, on...
SH775 made by Shindengen. Available at roadstercycle.com.
Don't know your age, but check out my upgrades and mods for an old geezer (is there any other kind?)
...and cheap too! I used to burnish the contacts on memory modules with a pencil eraser, kind of adapted the idea. Notice the center connector was...
Talked to SpeedMob in Richmond, CA and they said they couldn't get any product for 7 months. They will have a new line next week, stay tuned.
Here is schematic from a 2003, should be same basic circuitry. [IMG] Sounds like you hooked switch to ground instead of coil on relay or coil of...
If you really what to get down to bare metal, try my trick. I use an emery board ( cheap nail sanding board), small size. Peel sandpaper off...
Yes, see my post on: http://vfrworld.com/forums/showthread.php/45623-replacing-with-vfrness-where-is-the-red-white-wire-for-starter-relay
I just replaced my chain and sprockets. To keep from wasting expensive spray and getting it all over sprockets, hubs and rear wheel I got the...
You didn't indicate year of your VFR, but here is what I had to do when I replaced my R/R and hard wired it back to battery. On the output of the...
Separate names with a comma.
