In practical terms, the needle seats don't wear (rubber vs. brass) and shouldn't need replacement, so buy needles only and save some of $$. K&L...
EVERY motorcycle tire manufacturer warns against mixing radial and bias-ply tires on a bike. Since radial tires are designed to go on specific...
Have you tested the charging system output by measuring voltage across battery terminals with the engine turning about 5000 rpms ??? If you don't...
Always ! :saturn:
Every tire manufacturer's recommendation is not to mix radials and bias-ply together on any bike. :eagerness::playful: Also while keeping rim...
For the same money you could find a nice gen 2.................just sayin. :smiley_simmons::smiley_simmons::smiley_simmons:
What kind of idiocy is that ? Amber lights are a useful safety feature. On bikes, front AND rear. I shall jolly well speak with the Queen...
"You don't need to do the drop idle procedure. Just set them 2 or 2.5 turns out and ride the bike. I believe 2.5 is about stock." But...
TC has had years and years of VFR 'sperience, and he's never been wrong yet. :beguiled: On '86 and '87 VFRs there were tabs on the idle...
Shoulda mentioned you had a Yosh earlier as that WILL require mid-range tuning with washers or mainjets to avoid a natural flat spot area. :stung:
Bikes need front running lights, but some don't have them. ANY bikes (mostly earlier 70's and 80's) that don't have dual-filament bulbs for...
Having been slightly injured and a Hawk almost destroyed from being rear-ended at a stoplight, i spent $25 in bulbs and sockets and converted my...
Posting this classic from my '86 700....... [ATTACH] The wiring is fine but the connections tend to fry.
!!!!!! Here's what shook out of a VFR muffler that had been sitting in an outdoor shed for years............... [ATTACH][ATTACH]
Electricks never make the right soundz.
AS stated above, the air joint pipes are vents and must not be plugged. Have you tested that the vacuum slide diaphragms are installed properly...
Won't you also need the F2 rear wheel to keep the bike from being an ill-handling pig ?? I'll defer to capt 80's for an answer. Having a radial...
[ATTACH] The lower bushing on the 4th gen forks is a bit too loose a fit to the outer tube, causing alot of slop, and i used paper shims in...
I'd like a raDar-activated light to pop on my left or right side dash panel to warn of cars approaching your sides. A dash light indicating...
No fan of transplants.:potstir: How much shorter are the CBR forks than the VFR ? Seems like too much difference in ride height since the CBR...
Separate names with a comma.
