I've used the jack/block under the headers on my 5th gen a number of times but I never trust it! I have to make sure I loosen as many big...
The bonus with the head lift stand is that you can easily remove the forks for servicing (or endlessly changing shims as in my case...). I made a...
The big hub nut is "staked" to the axle. That means a small section of the nut is pressed into a slot on the axle so it can't come loose. You need...
These are great and cheap but probably too far away (although they all come from China). An easy one-handed lift and nice and steady. You need to...
There IS no adjustability in 5th gen calipers. The only thing that you can do is check that the left axle mount is in the right place on the axle,...
The Service Manual says....334.3mm
You should be able to test the switch by heating in oil to a little above boiling point , and checking for continuity. That is, when cold it...
Then my VTR1000 must BE a Harley. I'm just some leather chaps and a bad attitude away from Hog Heaven!!! Sent from my iPhone using Tapatalk
Service manual says 544mL per leg, or a finished level 100mm from the top of the leg, springs out and leg fully compressed.
There's a lot of parts involved in this. I think the hardest bit to fit would be the secondary master cylinder which sits on the left fork leg and...
Does that translate to "My hovercraft is full of eels"?
What is the idle speed set to? Maybe it is a little low. The idle screw is accessed through the small hole in the right side frame spar, could...
Here's a link to a service manual that you can download; wiring diagram from memory is right at the back....
Hi Robert, welcome aboard. Nice colour VFR!
The other Anniversary bike here had the black wheels. I use Metzeler Z8 tyres and think they're great, but I can't comment on other brands....
The two bikes I referred to were both the Honda UK 50th anniversary models in red/black with Nitron shock and new muffler (Remus?). This is one of...
Mark641, can I ask how you mounted the front mudguard? I see VTR lower legs, callipers off maybe a CBR600 or 929 (I have something similar mounted...
I know there are at least two here in New Zealand that have come up for sale on our local auction site in the last year. I nearly bought one as...
Wheel hub width VTR 100mm, VFR 107mm. Very hard to be exact without disassembly but the hub difference looks to be the same as the disc difference...
I have both a VTR and VFR in my garage and I'm happy to measure whatever. What do you need to know? The discs have same diameter, different...
Separate names with a comma.
