Good suggestion; I'd also add a bit of grease on the end of the rod. Sent from my iPhone using Tapatalk
Zaumer are you getting any FI warning light action? Your symptoms almost sounds like when you are re-starting, the FI is missing an expected input...
Thanks Jason, I might just give that a go. Your bike is beautiful by the way, I had a 750 like that back in the day. Honda were really on top of...
That's very creative; my one gripe about my 5th gen is just the same, the two spline positions are not right for me, somewhere in between would be...
84000km, 5th gen 1999. Runs like a Swiss watch! A bit thirsty but that could be my fault. No leaks, smoke, oil use or weird noises. Definitely...
Miles or km? Sent from my iPhone using Tapatalk
Sorry if this is teaching you to suck eggs, but have you gone through the diagnostic procedures to identify why the FI light comes on? The system...
Food for thought???
The thermostat holds the temps nicely at 77-82C when I'm moving so it works great. I think there might be a drippy injector as the oil level...
No the brakes are great; I've been through these and cleaned the seals and lubed the sliding pins, and with EBC HH pads they are just brilliant,...
Maybe you should send Staintune an email and ask them? sales@staintune.com.au
I might have to look into that; but intuitively I can't see why a blocked filter would affect economy as this is would only reduce fuel flow to...
50000 miles is just run in! I'd be surprised if you have any issues within the crankcases that would need attention. It would appear that the...
I always wear disposable foam plugs on any ride. I used to get ringing ears without them. I work in a noisy industry so hearing protection is the...
The only thing that I would check is the fork spacing side to side in the clamps; I think I've read somewhere that the wheels/discs etc are...
The 767mm that I measured was with the wheel lifted off the ground, but wheel brakes etc installed. I did not include the fork cap in the...
I've been going through the process of suspension upgrades this year. New tyres are always the best place to start and restore a lot of confidence...
I suspect you'll find that there is a bit of threadlock that is stopping the bolt coming out easily, but it won't take much force to overcome...
Yikes! Glad you asked for clarification. I just remeasured with the wheel off the deck, and get an accurate 767mm between the top of the tube and...
Hi Mike Not an easy thing to measure on the bike, but I got around 605mm on mine. Could be off by +/-5mm as I was unable to get a straight line...
Separate names with a comma.
