Yes, as odd as it may sound the lower the gauge number, the larger the diameter of the wire! Houses are wired with #12 primarily, and #14 for...
No cooling fan, just a large heat sink. I had already trimmed the dust cover for the Cree's, I just trimmed a little more for a snug fit around...
An emery board is a little cardboard sanding board for fingernails, you can find them in any cosmetic department
Follow Zen's advice. Difference in temp is minor in regards to conductivity. When I put too high of wattage lights in an ran down my battery, it...
Just posted my new install on my original thread: http://vfrworld.com/forums/showthread.php/44264-6TH-Generation-LED-Headlights
My replacement H4 LED headlights arrived yesterday from Hong Kong. The Cree failed twice, so I got a refund and got these:...
Just as we getting the LED's sorted out, BMW comes along with this: http://bmwmcmag.com/2014/02/bmw-laser-headlights-go-into-production/
Great post, I will do same to my 83 750 when I get her back and start working on it.
There were some Chinese LED mirrors on fleabay that claim to fit VFR800, any one tried those?
If yours is similar to the 6th gen bikes, then there is a temperature switch on left side, left end of radiator that grounds fan motor to make it...
An unusual source for a review, but interesting: http://lumenosity.blogspot.com/2010/06/honda-pacific-coast-800-pc800.html
I bought the 7443-R45-T in red for my Brake/Tail Lights, fit fine, work great. At 24.95 each, I wasn't going to use them for the turn signals!...
I agree with cap, without proper seal, pressure will not build up in cooling system. Water will not boil as soon under pressure. That's why you...
They would have the advantage of aiming them off to the right to pick up deer butts.
Shoei is making a Transitions shield:http://www.motosport.com/motorcycle/SHOEI-CW1-PHOTOCHROMIC-PINLOCK-SHIELD But since my glasses are already...
When they worked, they were great. You guys with the 5th gen bikes have it a little easier then those of us with 6th gen machines. [IMG] On our...
1986, analog instruments, no clock, right? Shouldn't be any drain on battery while off. My 03 has a clock and digital instruments, so there is a...
When measuring current, meter is in series in the circuit. Used only for low current, less than 10 amps. When measuring voltage meter is in...
ftl900: those are the lamps I ordered, should be here any day. I will update this thread with fit and install, hopefully this weekend.
If you are running a parasitic draw test, you need to be measuring current, not voltage. Put you meter on the 10A scale and run test, with key...
Separate names with a comma.
