Test the fan by applying power to its main electrical lead, a 2-prong connector on the right side. Green is ground, duh ! With the fan...
*DISCLAIMER: by responding to this, no claim to expertise or genius is implied or expressed. Only concerning squirrels (Scirius Carolinensis) or...
First of all, drain the float bowls and pour some FRESH fuel into the tank. Most likely the low starting speed indicates that one or more...
Depends upon the weather and gettin across the border without any Nazi customs hassles. [ATTACH] [ATTACH]
Check and top up coolant under the rad cap when system is cool. Level in overflow bottle may or MAY NOT be a true representation of cooling...
It's hanging on the 2 dowel pins, so you need to start loosening it up at their locations.
remove main jet from holder and put a wire through the tube. tube is constant in diameter.
It's really easy to get the slide diaphragm installed wrong if you've had the caps off. Test by blowing air into the large air vent hole to see if...
Handling a VFR at low speeds requires using the clutch's FRICTION ZONE to smooth things out, as mentioned above. :stung:
Pick up coils are known to be heat-sensitive, and weak ones usually only fail after the engine reaches operating temperature. Seems like you...
Big difference between nature's wildlife and farm-raised food animals, or can't u see that ?? :livid: [ATTACH]
Always a good idea if the bike hasn't been started for awhile, yes. :smile-new:
The sparks you see are fat, blue, and crackely, right, not weak and orange. Remember that plugs may spark OK out of the bike but fail under...
Earlier VFR fans switch on at 100C., 212F.
Sure, any small-dick, stupid idiot thinks he's more a man by killing more animals.
OK, alrighty, i know nuttin 'bout sports 'sept motor racin or care a damn. :livid: Professional, corporate sports is the OPIUM of the people.
How could any semi-sensitive individual enjoy seein guys punchin each other in anger with refs doin nuttin ? Is it hockey or boxing ? Only...
Good though over-blown ad: " You've probably heard about it". Please, not that. And it's not original if it's missing the sidestand cover, Bunky...
Stop on way at the AMA motorcycle museum in Ohio, then the Barbour in Georgia. :stung:
You can properly measure and set valve clearances at ANY position where the cam lobe is approximately pointing away from the valve top, no need to...
Separate names with a comma.
