Sorry i supplied incorrect info !! :homer:
Turned up on my local CL. http://buffalo.craigslist.org/mcy/4841101018.html Looks like a total re-paint. Not too encouraging, but i'd check...
[Reposting this which was originally placed between posts #12 and #13] ".....JUUUST before 8k RPM." Try putting a small washer or two (.020")...
Someone should ask Jamie whether he knows the details of the special Daytona AMA forks. The superforks were illustrated in both '86 and '87 VFR...
Especially so in higher gears than first. :smug:
Within the 2-3000 range the idle mixture screw setting is still a factor, i believe. These bikes will rumble at low rpms if you improperly demand...
Honda's service manuals are the one best source for proper routing of wires, hoses, and cables !!!!
So how old when u started ridin ? ( I'm keeping an '89 VTR250 ready to ride if my legs ever get weaker, next birthday 71.) [ATTACH]...
How 'bout YOU snap some close-ups of your rear seat fairing damage and post up........... ? :homer: Lots of cheap, easy plastic or fiberglass...
ALLY : ".... there are several convoluted tubes inside that would be very difficult to clean." Even with 110 psi compressed air ?? Doesn't...
You're measuring DC volts across any 2 yellow wires while r/r is disconnected ? Healthy stator should put out voltage increasing with revs from...
The Upgraded VFR front end with drop-out axle ( raced in '86 Daytona AMA) might have different-sized seals ???? Pretty sure those forks came from...
Are you using too much choke ?? After 1 minute choke should be off and idle speed adjusted with the suitable screw or plugs will foul and engine...
Pitbull caN't getcher front wheel up as centerstand can easily !! All u need to know, lad.
Probably will need a good carb cleanin b4 it runs well again.
Overheatin is the #1 reason fer blown head gaskets !!
Wake up, Bunkie ! Minimum BASIC MAINTENANCE checks on any new bike BEFORE you ride would include verifyin oil level, coolant level, brake and...
Carbs need a proper hand-cleaning, not just a simple chemical dip. :bull_head:
Pity the sad loser who buys a cheap VF500 without consulting this forum first !!
Your best bet is David Silver spares. Can't be repaired unless you can source bearings and seals and a competent fetteler. :tongue-new:
Separate names with a comma.
