How much ?? How much would you pay for each additional hp ?? $100, $200 ?? Be real, a VFR is just as fast as any prudent adult rider can use,...
Any time the clutch or brake mc is emptied of fluid it's best to bleed the mc separately at it's banjo bolt before hooking it up to the lines....
Something smellsa funny here ! Try removing the fairings, radiator, and front valve cover for inspection. If you don't find something wrong...
Clunk could be excessive slop in cushdrive rubbers, possibly needing replacement.
This popped up today....... 1984 84 1983 83 VF750F Honda Interceptor Parts + Engine VF750 VF700
Man, i love them Webers ! What i cut my teeth on back in the 60s. Ever read the Weber tuning and maintenance book by John Passini, vital for...
Brake mc should not be filled to top. Allow space for air or brakes can lock on.
Running the fan after riding doesn't accomplish much since the coolant isn't circulating, so it won't cool the engine.
Spraycan carb cleaner, but keep spray away from any plastic. Scotchbrite to polish up the choke plungers. one quick spritz with WD-40 when assenbling.
TBR woudda been a smart move for signal, but that's real money, and his was FREE !! :homer: Now he really needs the PC to sort it all out.
The screws have small manufacturing variations, so what's fine for you might not be so on another bike. That's one reason why the...
You need to avoid opening up the throttle at lower rpms in any higher gear as the engine hates lugging. OK to cruise at low 3-3.5 rpms, but...
That's right, and be super-carefull not to loose the small brassy-looking spring in back of the plunger. Matter of fact, if one of those went...
Often, if the bike went over on its side, air can get into the brake mc, so a bleed is in order. No need for pump relay if you bypass the relay...
Now THAT is a very good reason indeed !
You need to test the cable while it's disconnected to check for stiffness or binding and probably clean carb choke port and the plunger too....
Well said !! Too many kids think bigger is always better and want to go with the Harley-inspired fat tire look no matter what it does to the...
Count yourself lucky if they do a good job with your carbs !! YOU need to remove the petcock, drain and flush the fuel tank and check for signs...
Check for rotor warpage, but i'll bet it's the steering stem bearings needing a re-grease and adjustment. Get it up on the centerstand, block...
Shifting problems like yours are usually caused by a clutch that won't fully release. Without oil, there is a possibility that fibre plates are...
Separate names with a comma.
