A drain for condensation water and rain. Allows moisture to drain. Keep the hole open by probing it with a wire occasionally.
Talk about an all-too-common |VFR problem !!!!!! It's the r/r or the stator or a melted, damaged plug connection between the stator and the r/r...
If you MUST ride on a discharging battery, pull out the headlight fuse, and don't ride at night. A tach jumping around then no power suggests a...
You've done a great job trouble shooting and covered all the bases, but dija try changing the thermostat ??
It wasn't broke, so why did it get f'ed with?? Now the format is too wide for my screen, and i must left and right arrow to see the text, and...
Just about what i was thinking. Once you get the overflow coolant flowing BACK into the system you problems should be solved. Look for a kinked...
Near Sacramento.........step up, TOE as this deal is perfect for you !!
Or you might have switched the other 2 pairs of wires, 2 (Red) connecting to the main wiring harness through the main 30 amp fuse, and the other 2...
Not one to question a respected resident of Bernallilo county, where i once spent a very unpleasant night in the county detention center (stopped...
Embarassing to admit ?? On an interstate ride, i twist up the idle adjustment screw to use as a cruise control. I'm an idiot ?? Maybe.:crazy:
If some PO changed the headset bearings from balls to tapered rollers the steering would be a bit heavier than OEM. i agree with anyone who...
Could it be fork oil ?? Being strapped down over bumps with the forks compressed for lots of miles in the back of a truck might have forced...
Yep, i remember and remember that i said my local Honda dealer (Hamburg Honda) will cut a new key if you have the code # for just $7 !!!! Key...
Nope, the diode should allow electrons to flow in one direction only.
Clearing the crud from the enrichener pick up tube takes time and alot of pecking with the wire to gradually poke through. Even if the tube...
Did you switch around the 2 large terminals ?? One is marked "M" and goes to the starter motor.
Lots of helpful hints if you search, seldom or never an easy job. Here's one: Lube both ends of the mounts and install them loosely (partially...
[ATTACH] The only way it can be done if they're clogged...... Tube isn't clear until you can probe to about 30 mm depth, then spray, then...
Good project or expensive, pointless time-waster, you wouldn't know without an extensive investigation, starting with why it was left in a...
Hey, :welcome: This is your first post here and you're stating what?? Scientific fact or one guy's opinion ?? I tried dielectric grease once...
Separate names with a comma.
