That someone makes a dumbass, avoidable mistake and pays nothing makes no sense to me. She needs to pay something for her ignorance and...
At 25k you're going to need a new chain and sprockets (if the original chain hasn't been replaced) at about $180 and at around 30k possibly new...
[ATTACH][ATTACH] The same exact Mitsubishi pump was used by many different manufacturers on many models over many years, so breakers' yards...
Wouldn't there be problems with timing since the cam drives are not sloted for adjustment but must be placed in fixed, stepped positions to fit...
The first problem i ever had with my first '86 700--back in 1991-- was a failed pump relay. I substited the jumper wire at the relay plug and...
Moment of silence for Frank Zappa ? Hell, no !! Make some noise ! Today is the birthday of one of America's most creative and original...
You'd sacrifice reliability for a slight HP increase, and often different cams need improved valve springs to control things at high speeds....
Starter switch Start button is designed to cut headlight power momentarily and has 2 contact sets within, one for power to starter solenoid and...
Tink's right: you'll waste time, screw things up without a service manual.
:welcome: Hey, that's a good project there !|:hitit: Our mostly friendly crew here:homer::homer::party2: will have you sorted out and on the...
Your r/r might be allowing excess voltage into the system cuz it's getting weird.
Waterless coolant ?? What's next, hydrocarbon-free gasoline ??
Best on any crashed bike to drop steering stem out and inspect/replace steering head bearings. Wheel bearings too. You don't want loose or...
You might have mistakenly switched positions of main harness wires that go to the fuse panel with the 2 wires (one is ground) that send power to...
Only moving a bike while you're sitting on it ???????? For me, never! I feel in far more control standing next to a bike than paddling my feet...
Try it yourself, Dave, before you recommend any product.
Small VFRWorld !! That carb and synch job was done on Slowbird's '86 700 when he brought his bike down here from the Toronto area about 2 years...
I don't understand how your bike could run OK with one bad pulse generator.......but you need to replace the pair. Not difficult mechanically,...
It never makes sense to change a battery without testing the charging system at the same time. A non-functioning charging system will kill...
If things are too far out of adjustment (seems like yours are), you'd need to remove carbs and do a proppa bench synch before setting up gauges so...
Separate names with a comma.
