Mark is the rider here who has his '86 RWB 750 up for sale . Should be listed in our classifieds or on Buffalo CL. It's a good one !!
All excellent advice, Guvna' [ATTACH] I did it a long while back, but someone needs to step in once in a while and repeat that the working...
Good point, Captain. Unless the headset bearings were replace some time, they're probably shot if the bike has lots of miles. According to the...
Nobody could say soaking hurts the carbs (except for the lube in the throttle shafts) but it's almost NEVER really necessary to clean the carbs so...
Someone would have to be an engineer or metallurgist to say exactly what went wrong there, which i'm not smart enough for. Seems unexplainable...
The longest, non-removable brass tube should be flowing fuel up to the enrichment plungers, but most are usually partially or totally CWC, that...
Not just the cam lobes, look at the bearing surfaces adjacent to them. Lines, discolouration, surface irregularities may show damage from dirty...
Just seeing a bit of light is not sufficient. Holes in jets can appear clean and open but have a built-up of encrusted, invisible gunk around...
What ?? Not all mystries have a solution. I'm not sayin, just guessin' possibilities.
Get your insurance money and step up to the almost nearly-modern world of gen 2 VFRs. I've checked this one out: 1986 Honda VFR 750...
It's more important to have a good lawyer at this point than a good repair shop. What part of your MSF BRC training kept you oot of becomming...
If it runs, you should KEEP THAT BIKE !!! You have no idea how rare a good-running VF500 is, and i see a future where VF500 engines with a...
Tops fall over on their side after a brief time....
It's great to see what a learning experience you're getting with this.....and that that sometimes involves pain. There is a small but...
'scuse me brovva, do it run ?? And do it have any glamour photos ?? Is there any conceivably rational possible chance that it could or maybe...
What i learned the first time i ever rode in the rain was this: You could soak in a swimming pool for a week and never get as wet as you can on a...
Before anyone tries a valve adjustment for the first time, i'd suggest that they go all around measuring and recording all the clearances on...
[ATTACH][ATTACH][ATTACH] You have the wrong end of the stick, Matey, as cam wear happens on and around the sharp nose of the cam while your...
The setup i installed on a friend's VFR had an extra-long banjo that connected the 2 lines directly to the MC outlet.
Seems like extreme over-kill for a basically simple job. You need to know the locations of the 2 dowel pins before you start tapping so you can...
Separate names with a comma.
