[ATTACH][ATTACH] Be sure speed sensor is fitting properly on the sprocket nut. Same as above: Use a C-clamp to press the slave piston back...
I loved the older Dunlop 591s and used them on almost all my bikes, but the 501s are an improvement and work well wet or dry.
[ATTACH] ASK Dot, she'll know. Sometimes horns can be fixed by spraying some lube into the front, then holding the button down and lightly...
Why did you decide to remove the airbox baseplate ???????? Because you didn't do any reading of the service manual and just started loosening...
It's probably knackered. Our thermoswitches are just as unreliable as the voltage regulators, and are the usual suspects when fan doesn't come on...
Nope, not on our bikes; instead, the "choke" adds additional fuel to the mix and is more properly labeled an "enrichment" device. If carbs are...
Easy mistake to make, but i suspect a good search on our site here first would have turned up the info you needed. It's an obsecure point,...
Right !! That makes no sense.............unless the chain came from China. Maybe he meant to type 20,000 instead of 2000 ?? A chain with...
......why i asked and what i suspected. Coulda been a float valve leak or dried out bowl gasket but got worse when plenum was pulled. It's...
Sure it do: reduced pumping drag after oil gets warm almost always makes a hot engine idle faster.
Next time be prepared to check all cylinders for spark as soon as she quits. If your problem is NOT fuel-related, you may have a failing pulse...
Said you removed airbox to check, but did you remove the alloy airbox baseplate too ?? Horrors !!!!
Wise to look for something newer. You saved yourself some headaches.
Please take and post some photos here if you can.
It really makes no sense to drop a new battery into a bike without verifying that the charging system is working 100%
New piston rings and new cylinder surface always need some accumulated mileage (break in) to seat and seal properly, and will allow excess oil to...
This time i agree with Don. Some jetkits require stock springs to be stretched or include modified springs, so rate of slide action might also...
Bad screws= screw tips trunkated not like fine point. Maybe you should try new O-rings, but i believe (with spring and washer) that they...
You're sure gettin closer, but somehow too much fuel is getting to 2 cylinders. Make sure idle jets look the same and have not been drilled....
Forget for sure !!! Pilot jets are not also called air screws. Different types of carbs use different circuits to slightly adjust idle...
Separate names with a comma.
