Auuughhh!! ....my whole body feels all funny and rubbery now.....euuuuuwwwww
I only got one of the LED strips to work. I attached power to the Green/Yellow wire and Ground to the Dark Green wire. The second LED Strip...
To a tank I get about 120 Miles before I hit reserve. If I keep going the farthest I've gone is 150 Miles. Again...that was with the 44...
So 25 is the bearing and #9 is the collar that I circled in the picture above. But that collar needs to stay in there....so what's my next step?
It's not just the Screwdriver thing (which you are now elaborating to make it completely different) Your PM's say that everything goes into the...
1st: I am focusing on getting the carrier to fit...that's why I am posting these pics. Maybe we can see something not right that may be causing...
That thing is a bearing...it spins. The original carrier has the same thing. Is it not supposed to be there?
What thing? This thing? [IMG]
Cleaned parts....still won't fit. Measured swingarm by putting tape measure through the axle openings. 9Inches. F2 Wheel: [IMG]...
Sebspeed, I am unsure of which parts you are referring to.
No...you are absolutely right. I had to work today...but when they let me go home I'll start cleaning.
Judging by post from the PO on this thread I think it's safe to say this kit didn't fit his bike properly either: ^^ Doesn't sound like a...
I know right? I thought that too. I tried using my really old and tattered stock VF500 ones and they make no difference. I then got the...
It isn't...read my post above. It's since been cleaned off. After it was cleaned off I installed the F2 Wheel Minus 1 Chain Adjuster and...
I've cleaned that gunk on the first picture off since taking that...no biggie. The 2nd pic....hmmm...I need a closer look at that to see what...
When I removed the rubber bits of the cush-drive the Carrier seemed to seat on its center...not on any of the metal parts that go between the...
[IMG] [IMG]
Hey Jamie...let me know if the picture above is good or not or if you need anymore pictures.
I've tried putting everything on the axle and trying to slide everything in....no good. I've tried sliding the axle through the swing arm and...
I tried the carrier without the Cush drive rubber bits and it still sticks out to far....and it seats on the center of the carrier somewhere....
Separate names with a comma.
