Honda sells 3 different lengths of mounting stalks, 23mm, 34mm. and 47mm (what you probably have). Also available through Dennis Kirk @ $10 each
I agree with reg, the EX 500 is an excellent choice.......as is a Honda Hawk.
Buy or download an "owners manual" for the bike, then read it. You'll need the information.
It really helps to whack on the screws with a hammer and the proper-sized screwdriver a few times before attempting to remove; it breaks the...
THAT'S the ticket right there ! easiest, cheapest way with minimum chances of damaging anything. be sure no metal flakes get into reservoir....
Greetings !! (He means me !!) Beware of sinking money into a project that can drain more cash than THAT bike is worth. Woulda been better to...
THE 750...... because it's much lighter and easier to work on and has better parts availability. There's no real need for the extra power or...
Lucky to have that chain hoist to help! #12 is a backing plate which most bikes are lacking, so don't fret. After you get forks back in...
You need to change the hub bearing # 26 too, not just the wheel bearings. Change seals #20-21-22 also. Now you can see that it was NOT smart...
TRY again, i think i fixed it .
-------------------------------------------------------------------------------- Part # 43353-461-771.....#3 on the diagram will fix that !...
AN obvious oxymoron here when you say a collector is selling ???????? Inspect cams b4 purchase ! I LOVE the headlights, but the price is...
Forks: if you can't remove the 6 mm bottom bolt cuz it spins, you'll need to use an impact driver, manual or air-driven. It's best to have a new...
GOOD work there, PD ! Nice job.
Don't blame the 1200 for being big, heavy, not a sportbike; Honda offers you the CBR 1000 too. Take your choice, but don't blame one for not...
......so how do you like it ???
If there's an additional hole or if the stock hole is enlarged you can fill with JBWeld and re-drill to stock size..... Change back to stock...
I traced the tool on graph paper here: [IMG] Hope it helps !
Good job on the valves, but you guys screwed up the synch operation ! Never remove the airbox base from the carbs unless you need to remove a...
Make sure all fuel is drained from carbs. Remove plugs and pour about 1/2 oz oil down each cylinder, then turn motor over as few times and...
Separate names with a comma.
