Western is the oldest of old-line dealerships, been around forever and does good Honda work but expensive. Except for the odd trade-in, they work...
THE F1s are not higher quality pieces like V & H, Kerker, Yosh. They're kinda cheezy and buzzy........ but at least they're not made in...
NIAGARA FALLS has been a hot tourist area since it was built in 1835......with some beautiful roads and right next to our nice Canadian neighbors.
LIKE where in NY??
AS a guy it's your responsibility to get a bra off at any time, so just pull and rock the tank backwards a few inches and she'll slide off
WHAT this is is: one cylinder cutting in and out. YOU may have carbs that are clogged. TRY using a fuel system cleaner like SeaFoam and see if...
IF you're OFF the bike getting the bike safely down off the stand is a matter of strength and balance..... .....like riding.
TO CHECK wiring and temp gauge BRIEFLY touch the wire going to the thermostat housing to ground (with key on).....gauge should show full scale...
Sic transit.......
sidestand switch......
LOTS of dumbass kids do wheelies to simply show off or from peer pressure, but maybe peer pressure from you could have convinced the kid that...
RIDE 185 miles in 40 degree weather??!! MAN. you are hearty and have the VFR fever!!
THOSE "mechanics" aren't much good if they haven't already checked the 2 switches...... ALSO check for a bad cell in battery and the R/R and...
replace it or use an in-line filter instead
GOLLY, guess i'll keep my '86 700s. After the valve covers are removed a valve adjustment could be done in under 2 minutes per valve.........
DON"T let anyone use "Kreem" on your tank; that stuff is way outdated compared to newer products.....
TAKE the tank to your favorite independent 'cycle repair shop and ask them to put it in the "Safety Clean" tank and wash it out with hose at top...
I DOUBT it....... the hole is way too small, and i never see squirrels in the building, but see lotsa mouses. The peanuts, however, are...
IT'S pretty easy to CHECK clearances .....much more involved to CHANGE them.
THAT should do 'er, jon, but i'd clean the mc and poke a small wire through the smaller of the 2 holes (and see if that helps) b4 rebuilding...
Separate names with a comma.
